Physics, 09.10.2019 09:00 ridzrana02

How is amplitude related to volume?

Answers: 2

Show answers

Answers

Answer from: bugbug26

Finally, the amount of increased volume that is achieved by an increase in amplitudeis also affected by the frequency. So, turning the amplitude level in the mid-range sound from the previous example will not have the same proportional effect on loudness as the bass sound.

Answer from: jadenyankey

Amplitude is important when balancing and controlling the loudness of sounds, such as with the volume control on your cd player.

Answer from: Quest

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm. the wire diameter is d = 0.9 mm. the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2) in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Another question on Physics

Physics, 22.06.2019 05:30

Debbie places two shopping carts in a cart corral she pushes the first cart which then pushes a second cart what force is being exerted

Answers: 1

Answer

Physics, 22.06.2019 15:30

To understand the behavior of the electric field at the surface of a conductor, and its relationship to surface charge on the conductor. a conductor is placed in an external electrostatic field. the external field is uniform before the conductor is placed within it. the conductor is completely isolated from any source of current or charge. part a: which of the following describes the electric field inside this conductor? it is in the same direction as the original external field.it is in the opposite direction from that of the original external field.it has a direction determined entirely by the charge on its surface.it is always zero. part b: the charge density inside the conductor is: 0non-zero; but uniformnon-zero; non-uniforminfinite part c: assume that at some point just outside the surface of the conductor, the electric field has magnitude e and is directed toward the surface of the conductor. what is the charge density η on the surface of the conductor at that point? express your answer in terms of e and ϵ0

Answers: 1

Answer

Physics, 22.06.2019 18:00

Which statement is the best definition of an atom? a) anything that has mass and occupies space. b) the smallest particle that has the properties of an element. c) a substance that cannot be broken down chemically into simpler substances. eliminate d) the smallest unit of a substance that exhibits all of the properties characteristic of that substance.

Answers: 2

Answer

Physics, 23.06.2019 01:00