subject
Physics, 20.09.2019 13:20 rbalexander25

What is the braking force needed to bring a 15kg car going 35 m/s to a complete stop in 5s?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 23:00
1point) a skydiver weighing 130 lb (including equipment) falls vertically downward from an altitude of 14,000 ft and opens the parachute after 20 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.85|v|0.85|v| when the parachute is closed and is of magnitude 17|v|17|v| when the parachute is open, where the velocity vv is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. find the speed of the skydiver when the parachute opens. speed is 150.6121788 ft/s find the skydiver's height when the parachute opens. height is 2338.98591 ft find the limiting velocity vlvl after the parachute opens. (think about whether this should be positive or negative.) vl=vl= 7.647 ft/s
Answers: 2
question
Physics, 22.06.2019 15:30
Ametal ring 4.20 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. these magnets produce an initial uniform field of 1.12 t between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.240 t/s . (a) what is the magnitude of the electric field induced in the ring? (b) in which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?
Answers: 2
question
Physics, 22.06.2019 19:30
Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).
Answers: 3
question
Physics, 23.06.2019 18:00
The steel pipe ab has a 102-mm outer diameter and a 6-mm wall thickness. knowing that arm cd is rigidly attached to the pipe, determine the principal stresses and the maximum shearing stress magnitude at point k. (round the final answers to one decimal place.) given: f = 10 kn
Answers: 2
You know the right answer?
What is the braking force needed to bring a 15kg car going 35 m/s to a complete stop in 5s?...
Questions
question
Mathematics, 19.02.2021 01:10
question
English, 19.02.2021 01:10
question
English, 19.02.2021 01:10
Questions on the website: 13722359