With the weight set to 60N and the efficiency set to 100% , find the minimum input force needed to lift the load with each system 1 fixed. 60 N =
1 fixed ,1 moveable 60N=
2 fixed , 2 moveable 60N =
3 fixed , 3 moveable 60N =

Need help pl

​

Several processes form metal ore. match each process to its description. volcanic activity weathering hydrothermal energy rocks break down as they interact with air and water. arrowright density differences and other factors cause metals to concentrate in igneous rocks. arrowright seawater heats up from contact with hot rock, and metals dissolve in it. the water rises and contacts cooler water, causing metal ores to settle on the ocean floor. arrowright

Three archers each fire four arrows at a target. joe’s four arrows hit at points 10 cm above, 10 cm below, 10 cm to the left, and 10 cm to the right of the center of the target. all four of moe’s arrows hit within 1 cm of a point 20 cm from the center, and flo’s four arrows hit within 1 cm of the center. the contest judge says that one of the archers is precise but not accurate, another archer is accurate but not precise, and the third archer is both accurate and precise. which description applies to which archer? explain

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.