What is the force of friction caused by a block with a weight of 150N being pushed across a floor with a coefficient of friction equal to 0.5?

F500 j of energy were added to 1 kg of each of these samples, which would experience the least temperature increase?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Steelhead trout migrate up stream to spawn.occasionally they need to leap up small waterfalls to continue their journey. fortunately, steelhead are remarkable jumpers, capable of leaving the water at a speed of 8.0 m/s. a. what is the maximum height a steelhead trout can jump? b.leaving the water at 8.0 m/s, the trout lands on top of the water fall 1.8 m high. how long was it in the air?