subject
Physics, 09.03.2021 04:00 sarahandlara200

Heat Conduction Through an Annular Wall With Temperature Dependent Conductivity Heat is flowing through an annular wall of inside radius ro and temperature To and outside radius r1 with temperature T1. (see next page) The thermal conductivity k(T) varies linearly with temperature through this region, (a) Obtain an expression for the total heat flow through the wall evaluated at the outer surface. (b) Simplify the above result when (d is the annular thickness, much smaller than the inner radius) in which case and the geometry unravels

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 10:30
The speed of light can be used to measure the
Answers: 1
question
Physics, 22.06.2019 11:00
Afisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. it takes a time of 2.20 s for the boat to travel from its highest point to its lowest, a total distance of 0.670 m . the fisherman sees that the wave crests are spaced a horizontal distance of 5.80 m apart. (a) how much is the wavelength? (b) find the period of the wave. (c) how fast are the waves traveling? (d) what is the amplitude a of each wave?
Answers: 3
question
Physics, 22.06.2019 13:00
Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?
Answers: 1
You know the right answer?
Heat Conduction Through an Annular Wall With Temperature Dependent Conductivity Heat is flowing thro...
Questions
question
Mathematics, 15.10.2019 08:00
question
Biology, 15.10.2019 08:00
Questions on the website: 13722363