subject
Physics, 08.03.2021 21:30 kristofwr3444

Which machine needs a fulcrum, or a point where the machine is supported?

ansver
Answers: 1

Another question on Physics

question
Physics, 23.06.2019 00:30
Asmall electric heater, immersed in 80g of water in a calorimeter of 40j/k raises the temperature from 10.5 degree celsius to 25 degree celsius in 12 minutes. using the same apparatus with 50g of oil instead of water, it is found that the temperature of oil rises from 7 degree celsius to 27 degree celsius in 10 minutes. find specific heat capacity of the oil.
Answers: 2
question
Physics, 23.06.2019 02:10
The molecular mass of a gas is (select all that apply) a. independent of the type of gas b. the same number as the atomic (or molecular) mass, but measured in grams c. dependent on the temperature d. the mass of a mole of the gas
Answers: 1
question
Physics, 23.06.2019 05:00
The voltmeter reads 117 v and ammeter reads 0.13 a .if the resistance of ammeter and voltmeter are 9 kilo ohm and 0.015 ohm respectively ,find the value of r. 3marks
Answers: 3
question
Physics, 23.06.2019 06:30
Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?
Answers: 2
You know the right answer?
Which machine needs a fulcrum, or a point where the machine is supported?...
Questions
question
Health, 27.06.2019 10:30
question
Health, 27.06.2019 10:30
Questions on the website: 13722367