In the following problems, assume the following parameters: Mass of the bottom steel disc: 1.468 kg.
Mass of the upper steel disc: 1.479 kg.
Mass of the upper aluminum disc: 0.461 kg.
Radius of each disc: 63.3 mm.
Radius of the take-up spool: r= 1.25 cm.
Mass of the falling weight: 25 grams.1.

1. Using the values given above, calculate the following:

a. The moment of inertia of the lower, steel disc.
b. The moment of inertia of the upper, steel disc.
c. The moment of inertia of the upper, aluminum disc.
d. The combined moment of inertia of the two steel discs.

2. Using the results of problem 1, what percentage error is made by neglecting mr2with respect to Iin equation (95)?
3. Suppose that the counter is reading 400 counts per second at some moment. What is the value of Ïat that moment?

1) a)  I₁ = 0.2941 kg m², b)  I₂ = 0.2963 kg m², c) I_{total} = 0.5904 kg m²

3)   α = 6.31 10⁶ rad / s²

Explanation:

1) The moment of inertia for bodies with high symmetry is tabulated, for a divo with an axis passing through its center is

         I = ½ m r²

a) moment of inertia of the upper disk

        I₁ = ½ m₁ r₁²

        I₁ = ½ 1,468 0.633²

        I₁ = 0.2941 kg m²

b) upper aluminum disc moment of inertia

        I₂ = ½ m₂ r₂²

        I₂ = ½ 1.479 0.633²

        I₂ = 0.2963 kg m²

c) the moment of inertia is an additive scalar quantity therefore

         I_{total} = I₁ + I₂

         I_{total} = 0.2941 + 0.2963

         I_{total} = 0.5904 kg m²

3) ask the value of the angular acceleration, that is, the second derivative of the angle with respect to time squared

indicate the angular velocity of the system w = 400 rev / s

Let's reduce the SI system

        w = 400 rev / s (2π rad / rev) = 2513.27 rad / s

as the system is rotating we can calculate the centripetal acceleration

          a = w² R

          a = 2513.27² 0.633

          a = 3.998 10⁶ m / s²

the linear and angular variable are related

          a = α r

          α = a / r

          α = 3.998 10⁶ / 0.633

          α = 6.31 10⁶ rad / s²

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!

find the sum of the two horizontal vectors and the sum of the two vertical vectors

isoceles right angled triangle