Physics, 04.03.2021 20:00 bubbagumpshrimpboy

1. What sources of error could there have been in the part of the experiment where you boiled the substances? 2. What could you have done to reduce those errors?

3. The vapor pressure of a liquid is a measure of how much vapor of a liquid sits in the air above the liquid in a closed container. So, for example, a steam room has a very high vapor pressure of water. Do you think a substance that has weaker forces between molecules would in general have a greater or lesser vapor pressure than a substance with stronger forces between the molecules? For example, compare isopropyl alcohol and water.

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 10:30

The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g

Answers: 1

Answer

Physics, 22.06.2019 14:00

Me pl give an example of a collision in real life. use the law of conservation of energy to describe the transfer of momentum. be sure and discuss the momentum before and after the collision occurs. you will need at least 3 sentences to thoroughly answer this question.

Answers: 3

Answer

Physics, 22.06.2019 17:40

The weights of bags filled by a machine are normally distributed with a standard deviation of 0.05 kilograms and a mean that can be set by the operator. at what level should the mean weight be set if it required that only 1% of the bags weigh less than 9.5 kilograms? round the answer to 2 decimal places.

Answers: 1

Answer

Physics, 22.06.2019 21:00

Acentrifuge in a medical laboratory rotates at an angular speed of 3,700 rev/min. when switched off, it rotates through 54.0 revolutions before coming to rest. find the constant angular acceleration (in rad/s2) of the centrifuge. your response is within 10% of the correct value. this may be due to roundoff error, or you could have a mistake in your calculation. carry out all intermediate results to at least four-digit accuracy to minimize roundoff error. rad/s2

Answers: 1

Answer

You know the right answer?

1. What sources of error could there have been in the part of the experiment where you boiled the su...

Questions