0. A 0.10-kilogram piece of modeling clay is tossed at a motionless 0.10-kilogram block of wood and sticks." The block slides across a frictionless table at 15 m/s. At what speed was the clay tossed? b. The clay is replaced with a "bouncy” ball tossed with the same speed. The bouncy ball rebounds from the wooden block at a speed of 10 m/s. What effect does this have on the wooden block? Why?

James is trying to prove newton's 2nd law of motion. he tries to move four different objects with different masses, shapes, and sizes from point a to point b. the objects are a toy car, a car, a refrigerator, and a kitchen table. after some experimentation, he finds that force is dependent on the mass of the object, rather than it's size or shape. the object that takes the most force to move is the

Ahot-air balloon takes off from the ground traveling vertically with a constant upward acceleration of magnitude g/4. after time interval δt, a crew member releases a ballast sandbag from the basket attached to the balloon. how many seconds does it take the sandbag to reach the ground? (express your answer in terms of δt)

Athin electrical heater is inserted between a long circular rod and a concentric tube with inner and outer radii of 20 and 40 mm. the rod (a) has a thermal conductivity of ka = 0.15 w/(m*k), while the tube (b) has a thermal conductivity of kb = 0.8 w/(m*k) and its outer surface is subjected to convection with a fluid of temperature t= -15°c and heat transfer coefficient 60 w/(m2 *k). the thermal contact resistance between the cylinder surfaces and the heater is negligible. (a) determine the electrical power per unit length of the cylinders (w/m) that is required to maintain the outer surface of cylinder b at 15°c. (b) what is the temperature at the center of cylinder a?