subject
Physics, 28.01.2021 22:10 pearlvldz

A car's speed changed gradually and evenly from 22 m/s to 35 m/s. It took the car 8.1 seconds to make the change in speed. On average, the car's speed changed by how much each second?

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 19:30
Aparticle travels in a circular orbit of radius 21 m. its speed is changing at a rate of 23.1 m/s2 at an instant when its speed is 37.2 m/s. what is the magnitude of the acceleration (in m/s? ) of the particle?
Answers: 1
question
Physics, 21.06.2019 22:50
If the temperature were raised very high, classically what would we expect the heat capacity per object to be for this one-dimensional system? give a numerical value. chigh t = __ j/k/object (one reason for the discrepancy is that the high-temperature limit assumes that the number of oscillators is large (n > > 1), which is not the case in this tiny system.)
Answers: 2
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 16:30
Atank has a shape of a cone with a radius at the top of 2 m and a height of 5 m. the tank also has a 1 m spout at the top of the tank. the tank is filled with water up to a height of 2 m. find the work needed to pump all the water out the top of the spout. (use 9.8 m/s2 for g and the fact that the density of water is 1000 kg/m3.)
Answers: 1
You know the right answer?
A car's speed changed gradually and evenly from 22 m/s to 35 m/s. It took the car 8.1 seconds to mak...
Questions
question
Chemistry, 20.10.2019 14:10
question
Mathematics, 20.10.2019 14:10
question
Mathematics, 20.10.2019 14:10
question
Mathematics, 20.10.2019 14:10
question
Mathematics, 20.10.2019 14:10
question
English, 20.10.2019 14:10
Questions on the website: 13722362