subject
Physics, 11.01.2021 21:30 allisonatalie6654

This question is a long free response question. Please show all work. I AM GIVING 3 TIMES THE POINTS FOR THIS QUESTION AND I WILL GIVE BRAINLIEST SO PLEASE RESPOND ASAP WITH GOOD ANSWERS.

A spring-loaded launcher can be securely attached to a tabletop. When the spring is at its uncompressed length, the plunger is in the position shown above in Figure 1. A small wood block can be pressed against the end of the plunger, compressing the spring a distance L , as shown in Figure 2. When the block is released, the plunger pushes the block along the tabletop. Two pins are attached to the edge of the table to prevent the plunger from extending beyond the table. When the plunger hits the pins, the block then leaves the table. There is nonnegligible friction between the block and the tabletop.

The launcher can be moved closer to or farther from the edge of the tabletop. Students set up tables 1 and 2, as shown above, with tabletops that are made of the same material. On table 1, the launcher is positioned so that the distance s=A between the launcher and the edge of the tabletop is slightly less than L. On table 2, the launcher is positioned so that the distance s=B between the launcher and the edge of the tabletop is significantly less than L. On both tables, the block is released from rest and loses contact with the plunger at the moment the plunger reaches the pins. Tables 1 and 2 are the same height.

k is the spring constant of the spring.
m is the mass of the block.
L is the distance the spring is compressed.
μ (mu) is the coefficient of kinetic friction between the block and the tabletop.
s is the distance between the launcher and the edge of the tabletop.

(a) Without manipulating equations, explain why the block launched from table 1 could land farther from the table than the block launched from table 2 does.

(b) Does the block launched from table 1 spend more, less, or the same amount of time in the air than the block launched from table 2 does? Explain your reasoning.

(c) Consider the Earth-block system. Determine the change, if any, in the total mechanical energy of the system from the instant the block leaves the table to the instant immediately before it reaches the ground.

The students correctly derive an equation for the horizontal distance D from the edge of the tabletop that the block lands, in terms of s (the distance between the launcher and the edge of the tabletop):

Note: the u in the above equation is actually a μ but the formula maker in doesn't like that.
where t is the time interval between the instant the block leaves the table and the instant immediately before it reaches the ground.

(d) Does this equation for D support your argument from part (a) that the block launched from table 1 could land farther from the table than the block launched from table 2? Briefly explain why or why not.

(e) The students now use the same setups to launch blocks that are identical to each other but more massive than the original blocks. The blocks are made of the same material as the original blocks. Does this change in the mass of the blocks make it more likely or less likely that the block launched from table 1 goes farther than the block launched from table 2 does? Briefly explain your reasoning.

(f) Two students each try to sketch a graph of the kinetic energy of the block as a function of its position from launch to the time the block reaches the edge of the table. Their graphs are shown above. Which graph best represents the kinetic energy of the block? Justify your selection.


D = t\sqrt{\frac{k}{m} * (2Ls - (s*s) - 2ugs }

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 03:00
Dinate system, and a charge q = - 2.00 nc is placed s2 10 n> c. (a) what is the change in electric potential energy when the dipole moment of a molecule changes its orientation with respect to es from parallel to perpendicular? (b) at what absolute temperature t is the average translational kinetic energy 32 kt of a molecule equal to the change in potential energy calculated in part(: abovethistemperature,thermalagitationprevents the dipoles from aligning with the electric field.) placed in a uniform electric field e with magnitude 1.6 * 6 on the positive x-axis at x = 4.00 cm. (a) if a third charge q3 = +6.00 nc is now placed at the point x = 4.00 cm, y = 3.00 cm, find the x- and y-components of the total force exerted on this charge by the other two. (b) find the magnitude and direction of figure p21.62 ll uu 21.55 . torque on a dipole. an electric dipole with dipole moment ps is in a uniform external electric field es. (a) find the orientations of the dipole for which the torque on the dipole is zero. (b) which of the orientations in part (a) is stable, and which is unstable? (hint: consider a small rotation away from the equi- librium position and see what happens.) (c) show that for the stable orientation in part (b), the dipole’s own electric field tends to oppose the external field. 21.62 ..
Answers: 1
question
Physics, 22.06.2019 16:50
Two loudspeakers, 5.5 m apart and facing each other, play identical sounds of the same frequency. you stand halfway between them, where there is a maximum of sound intensity. moving from this point toward one of the speakers, you encounter a minimum of sound intensity when you have moved 0.33 m . assume the speed of sound is 340 m/s.part a) what is the frequency of the sound? part b) if the frequency is then increased while you remain 0.21 m from the center, what is the first frequency for which that location will be a maximum of sound intensity? express your answer to two significant figures and include the appropriate units.
Answers: 2
question
Physics, 22.06.2019 21:30
What describes the formation of horizon b? a. forms at the surface b. features parent material c. undergoes the most change d. forms due to decomposed material i think the answer is c. undergoes the most change
Answers: 1
question
Physics, 23.06.2019 06:00
What is offspring? why does a longer life span mean a higher chance of producing offspring?
Answers: 3
You know the right answer?
This question is a long free response question. Please show all work. I AM GIVING 3 TIMES THE POINT...
Questions
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
question
Chemistry, 14.01.2021 22:50
Questions on the website: 13722363