Physics, 05.01.2021 22:20 Shiey0409

Calcium oxide write this in a formula

Answers: 1

Show answers

Another question on Physics

Physics, 20.06.2019 18:04

Agardener uses a wheelbarrow to move soil from a truck to his garden. on the first trip from the truck to the garden, the wheelbarrow is half-full of soil and the gardener applies a certain force to cause it to accelerate. on the second trip, the wheelbarrow is full of soil. although the gardener applies the same amount of force to the wheelbarrow, he cannot move it with the same rate of acceleration. what should the gardener do to move the wheelbarrow at the same rate of acceleration for the second trip?

Answers: 1

Answer

Physics, 21.06.2019 20:30

3. on your graph, the data points between the black squares are data for elements with atomic numbers 3 through 9. locate these elements on your periodic table. what term or description would you use to identify these elements with respect to the periodic table?

Answers: 2

Answer

Physics, 21.06.2019 21:30

Aquantity of gas has a volume of 1.5 m3 and an absolute pressure of 95 kpa. when the gas is compressed to a volume of 0.5 m3, what is the new absolute pressure of the gas? (assume that there’s no change in temperature.)

Answers: 3

Answer

Physics, 21.06.2019 22:00

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

Answers: 2

Answer

You know the right answer?

Calcium oxide write this in a formula...

Questions