Physics, 30.12.2020 17:10 des6487

A 0.60-kg mass at the end of a spring vibrates 3.0 times per second with and amplitude of 0.13m. Determine (a) The velocity when it passes the equilibrium point,
(b) The velocity when it is 0.10 m from equilibrium
(c) The total energy of the system, and
(d) The equation describing the motion of the mass, assuming the x was a maximum at t = 0.

Answers: 2

Show answers

Answers

Answer from: petertester7up

a) The velocity when it passes the equilibrium point is $\pm 2.451$ meters per second.

b) The velocity when it is 0.10 meters from equilibrium is $\pm 1.567$ meters per second.

c) The total energy of the system is 1.802 joules.

d) The equation describing the motion of the mass, assuming that initial position is a maximum is $x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)$ .

Explanation:

a) If all non-conservative forces can be neglected and spring has no mass, then the mass-spring system exhibits a simple harmonic motion (SHM). The kinematic formula for the position of the system ( x(t) ), measured in meters, is:

$x(t) = A\cdot \sin(\omega \cdot t +\phi)$ (1)

Where:

- Amplitude, measured in meters.

$\omega$ - Angular frequency, measured in radians per second.

- Time, measured in seconds.

$\phi$ - Phase, measured in radians.

The kinematic equation for the velocity formula of the system ( v(t) ), measured in meters per second, is derived from (1) by deriving it in time:

$v(t) = \omega\cdot A\cdot \cos (\omega\cdot t+\phi)$ (2)

The velocity when it passes the equilibrium point occurs when the cosine function is equal to 1 or -1. Then, that velocity is determined by following formula:

$v = \pm \omega\cdot A$ (3)

The angular frequency is calculated by this expression:

$\omega = 2\pi\cdot f$ (4)

Where is the frequency, measured in hertz.

If we know that $f = 3\,hz$ and $A = 0.13\,m$ , then the velocity when it passes the equilibrium point, which is the maximum and minimum velocities of the mass:

$\omega = 2\pi\cdot (3\,hz)$

$\omega \approx 18.850\,\frac{rad}{s}$

$v = \pm \left(18.850\,\frac{rad}{s} \right)\cdot (0.13\,m)$

$v = \pm 2.451\,\frac{m}{s}$

The velocity when it passes the equilibrium point is $\pm 2.451$ meters per second.

b) First, we need to determine the spring constant of the system (), measured in newtons per meter, in terms of the angular frequency ( $\omega$ ), measured in radians per second, and mass (), measured in kilograms. That is:

$k = \omega^{2}\cdot m$ (5)

If we know that $\omega \approx 18.850\,\frac{rad}{s}$ and $m = 0.60\,kg$ , then the spring constant is:

$k = \left(18.850\,\frac{rad}{s} \right)^{2}\cdot (0.60\,kg)$

$k = 213.194\,\frac{N}{m}$

Lastly, we determine the velocity when the mass is 0.10 meters from equilibrium by the Principle of Energy Conservation:

$U_{k} + K = K_{max}$ (6)

$\frac{1}{2}\cdot k\cdot x^{2} + \frac{1}{2}\cdot m\cdot v^{2} = \frac{1}{2}\cdot m\cdot v_{max}^{2}$ (7)

Where:

$U_{k}$ - Current elastic potential energy, measured in joules.

- Current translational kinetic energy, measured in joules.

$K_{max}$ - Maximum translational kinetic energy, measured in joules.

- Current velocity of the system, measured in meters per second.

- Mass, measured in kilograms.

$v_{max}$ - Maximum velocity of the system, measured in meters per second.

If we know that $k = 213.194\,\frac{N}{m}$ , $x = 0.10\,m$ , $m = 0.60\,kg$ and $v_{max} = \pm 2.451\,\frac{m}{s}$ , then the velocity of the mass-spring system is:

$\frac{k}{m} \cdot x^{2} + v^{2} = v_{max}^{2}$

$v^{2} = v_{max}^{2}-\frac{k}{m}\cdot x^{2}$

$v = \sqrt{v_{max}^{2}-\frac{k\cdot x^{2}}{m} }$ (8)

$v = \sqrt{\left(\pm 2.451\,\frac{m}{s} \right)^{2}-\frac{\left(213.194\,\frac{N}{m} \right)\cdot (0.10\,m)^{2}}{0.60\,kg} }$

$v \approx \pm 1.567\,\frac{m}{s}$

The velocity when it is 0.10 meters from equilibrium is $\pm 1.567$ meters per second.

c) The total energy of the system (), measured in joules, can be determined by the following expression derived from the Principle of Energy Conservation:

$E = \frac{1}{2}\cdot m\cdot v_{max}^{2}$ (9)

If we know that $m = 0.60\,kg$ and $v_{max} = \pm 2.451\,\frac{m}{s}$ , then the total energy of the system is:

$E = \frac{1}{2}\cdot (0.60\,kg)\cdot \left(\pm 2.451\,\frac{m}{s}\right)^{2}$

$E = 1.802\,J$

The total energy of the system is 1.802 joules.

d) Given that initial position of the mass-spring system is a maximum, then we conclude that the equation of motion has the following parameters: ( $A = 0.13\,m$ , $\omega \approx 18.850\,\frac{rad}{s}$ and $\phi = 0.5\pi\,rad$ )

From (1) we obtain the resulting formula:

$x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)$ (10)

The equation describing the motion of the mass, assuming that initial position is a maximum is $x(t) = 0.13\cdot \sin (18.850\cdot t +0.5\pi)$ .

Answer from: Quest

speed of light in vacuum is 300,000 km/s

speed of light in other mediums is given by the expression v = c/n, where c is the speed of light in vacuum and n is the refractive index of medium.

for the first medium v = 200,000 km/s

so, refractive index of medium = 300000/200000 = 1.5

1.5 refractive index is usually for glass. so first medium is glass.

for the second medium v = 250,00 km/s

so, refractive index of medium = 300000/250000 = 1.2

1.2 refractive index is usually for water. so second medium is water.

for the third medium v = 0 km/s

so, refractive index of medium = 300000/0 = ∞

∞ refractive index is usually for opaque mediums. so third medium is opaque medium.

Answer from: Quest

Answer///air resistance,drag;

Another question on Physics

Physics, 22.06.2019 12:30

An ice-making machine inside a refrigerator operates in a carnot cycle. it takes heat from liquid water at 0.0 degrees celsius and rejects heat to a room at a temperature of 19.2 degrees celsius. suppose that liquid water with a mass of 76.3kg at 0.0 degrees celsius is converted to ice at the same temperature. take the heat of fusion for water to be l_f = 3.34*10^5 j/kg.how much energy e must be supplied to the device? express your answer in joules.

Answers: 1

Answer

Physics, 22.06.2019 15:30

To understand the behavior of the electric field at the surface of a conductor, and its relationship to surface charge on the conductor. a conductor is placed in an external electrostatic field. the external field is uniform before the conductor is placed within it. the conductor is completely isolated from any source of current or charge. part a: which of the following describes the electric field inside this conductor? it is in the same direction as the original external field.it is in the opposite direction from that of the original external field.it has a direction determined entirely by the charge on its surface.it is always zero. part b: the charge density inside the conductor is: 0non-zero; but uniformnon-zero; non-uniforminfinite part c: assume that at some point just outside the surface of the conductor, the electric field has magnitude e and is directed toward the surface of the conductor. what is the charge density η on the surface of the conductor at that point? express your answer in terms of e and ϵ0

Answers: 1

Answer

Physics, 22.06.2019 16:50

Aresistor with an unknown resistance is connected in parallel to a 9 ω resistor. when both resistors are connected in parallel to an emf source of 21 v, the current through the unknown resistor is measured with an ammeter to be 4 a. what is the resistance of the unknown resistor? answer in units of ω.

Answers: 3

Answer

Physics, 22.06.2019 19:30

Juliette sets the initial velocity to +10 m/s, the acceleration to zero, and clicks “start.” how can shakina describe the subsequent motion of the car juliette controls?

Answers: 3

Answer

You know the right answer?

A 0.60-kg mass at the end of a spring vibrates 3.0 times per second with and amplitude of 0.13m. Det...

Questions