subject
Physics, 19.11.2020 21:20 afrox

A dragster in a race accelerated from stop to 60 m/s by the time it reached the finish line. The dragster moved in a straight line and traveled from the starting line to the finish line in 8.0
sec. What was the acceleration of the dragster?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 15:30
Which type of electromagnetic waves are dangerous enough to be used to kill cancerous cells? (a)gamma rays (b)visible light (c)infrared light (d)microwaves
Answers: 1
question
Physics, 22.06.2019 05:00
Wavelength,frequency,and energy are related.what happens to a wave as it’s wavelength gets shorter?
Answers: 2
question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 14:20
4r-134a enters the condenser of a residential heat pump at 800 kpa and 50°c at a rate of 0.022 kg/s and leaves at 750 kpa subcooled by 3°c. the refrigerant enters the compressor at 200 kpa superheated by 4°c determine (a) the isentropic efficiency of the compressor, (b) the rate of heat supplied to the heated room, and (c) the cop of the heat pump. also, determine (d) the cop and rate of heat supplied to the heated room if this heat pump operated on the ideal vapor-compression cycle between the pressure limits of 200 and 800 kpa. (0.757, 4.37 kw, 5.12, 6.18, 3.91 kw)
Answers: 3
You know the right answer?
A dragster in a race accelerated from stop to 60 m/s by the time it reached the finish line. The dr...
Questions
question
Mathematics, 06.05.2020 05:46
question
Arts, 06.05.2020 05:46
question
Mathematics, 06.05.2020 05:46
question
Computers and Technology, 06.05.2020 05:46
question
Mathematics, 06.05.2020 05:46
Questions on the website: 13722361