You are studying circular motion by placing pennies on a turntable and then turning it on so that it will spin. You keep increasing the speed until one of the pennies slips off. You repeat this procedure and observe that the penny close to the outer edge always slip off first. What is the best inference? 1.The penny near the edge has a greater tangential velocity than the one in the center, so it experiences more air resistance. It’s the effect of the air “blowing” it off.

2.The centripetal force required to keep the pennies in place increases with the distance from the center. Eventually, as the turntable spins faster, the friction force between the turntable and the penny near the edge is not enough to supply the required centripetal force.

3.The centrifugal force acting on the pennies is stronger on the one near the edge than the one near the center.

2.The centripetal force required to keep the pennies in place increases with the distance from the center. Eventually, as the turntable spins faster, the friction force between the turntable and the penny near the edge is not enough to supply the required centripetal force.

Explanation:

centripetal force = m ω² R

here m is mass , ω is angular velocity and R is distance of penny from centre

So this force depends upon R

penny on the outer edge will require  greater centripetal force to move in circular path .

The centripetal force will be provided by frictional force of table which is same for both the coin . Hence the penny on the outer edge will slip off first the moment , frictional force reach its maximum value for it . But it will be sufficient to keep in balance the penny nearer to the centre .

the device is called “ rocket engine”

answer: i think he can see forward ten seconds and move forward ten seconds but giorno can undo his actions with ger.

explanation: