subject
Physics, 08.10.2020 03:01 kittenlover5031

Heat sterilization of lumber, timbers and pallets is used to kill insects to prevent their transfer between countries in international trade. Consider hot air heating that maintains the surface temperature at 70°C. The boards are stacked outside and in the winter time they can be considered to be at 0°C when they are brought in for heating. (a) Calculate the time for the slowest heating point to reach sterilization temperature of 56°C for a 2.54 cm thick board. (b) Calculate the heating time when four such boards are stacked together. Thermal diffusivity of the wood is 8.5×10-8 m2/s.

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 20:20
Copper has free electrons per cubic meter. a 71.0-cm length of 12-gauge copper wire that is 2.05 mm in diameter carries 4.85 a of current. (a) how much time does it take for an electron to travel the length of the wire? (b) repeat part (a) for 6-gauge copper wire (diameter 4.12 mm) of the same length that carries the same current. (c) generally speaking, how does changing the diameter of a wire that carries a given amount of current affect the drift velocity of the electrons in the wire?
Answers: 2
question
Physics, 22.06.2019 15:30
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.
Answers: 1
question
Physics, 22.06.2019 18:30
Adolphin emits ultrasound at 100khz and uses the timing of reflections to determine the position of objects in the water. part a what is the wavelength of this ultrasound? assume that temperature of water is 20 degrees c. answer in cm
Answers: 2
question
Physics, 22.06.2019 22:50
Cyclotrons are widely used in nuclear medicine for producing short-lived radioactive isotopes. these cyclotrons typically accelerate h- (the hydride ion, which has one proton and two electrons) to an energy of 5 mev to 20 mev. this ion has a mass very close to that of a proton because the electron mass is negligible—about 1 2000 of the proton’s mass. a typical magnetic field in such cyclotrons is 1.9 t. (a) what is the speed of a 5.0-mev h-? (b) if the h- has energy 5.0 mev and b = 1.9 t, what is the radius of this ion’s circular orbit?
Answers: 1
You know the right answer?
Heat sterilization of lumber, timbers and pallets is used to kill insects to prevent their transfer...
Questions
question
Mathematics, 13.12.2021 21:10
question
Mathematics, 13.12.2021 21:10
question
French, 13.12.2021 21:10
question
Social Studies, 13.12.2021 21:10
Questions on the website: 13722367