Physics, 08.10.2020 01:01 LlayahHarbin

A 70-m-long chain hangs vertically from a cylinder attached to a winch. Assume there is no friction in the system and that the chain has a density of 5 kg/m. Use 9.8 m/s2 for the acceleration due to gravity. a. How much work is required to wind the entire chain onto the cylinder using the winch? b. How much work is required to wind the chain onto the cylinder if a 35-kg block is attached to the end of the chain?

Answers: 1

Show answers

Answers

a) The work required to wind the entire chain onto the cylinder using the winch is 120135.75 joules, b) The work required to wind the chain plus the block is 144162.9 joules.

Explanation:

a) Let be an infinitesimal part of the long chain, whose gravitational potential energy is:

$dU_{g} = g\cdot z \,\delta m$

Where:

$U_{g}$ - Gravitational potential energy, measured in joules.

- Gravitational acceleration, measured in meters per square second.

- Mass of the long chain, measured in kilograms.

- Height of the portion of the long chain with respect to ground, measured in meters.

Since chain has an uniform linear density, this differential expression can be rewritten as:

$dU_{g} = \lambda\cdot g \cdot z \, dz$

Where $\lambda$ is the linear density, measured in kilograms per meter.

We obtain the gravitational potential energy to wind the chain onto the cylinder by integration:

$\Delta U_{g, chain} = \lambda\cdot g \int\limits^{z_{f}}_{z_{o}} {z} \, dz$

$\Delta U_{g, chain} = \frac{\lambda\cdot g}{2} \cdot (z_{f}^{2}-z_{o}^{2})$

Where:

$\Delta U_{g, chain}$ - Gravitational potential energy of the entire chain, measured in joules.

$z_{o}$ - Initial height with respect to ground, measured in meters.

$z_{f}$ - Final height with respect to ground, measured in meters.

From the Work-Energy Theorem we get that work needed to wind the entire chain equals the gravitational potential energy of the entire chain:

$W = \Delta U_{g, chain}$

$W = \frac{\lambda\cdot g}{2} \cdot (z_{f}^{2}-z_{o}^{2})$

If we know that $\lambda = 5\,\frac{kg}{m}$ , $g = 9.807\,\frac{m}{s^{2}}$ , $z_{o} = 0\,m$ and $z_{f} = 70\,m$ , the work needed is:

$W = \frac{\left(5\,\frac{kg}{m} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}{2} \cdot [(70\,m)^{2}-(0\,m)^{2}]$

$W = 120135.75\,J$

The work required to wind the entire chain onto the cylinder using the winch is 120135.75 joules.

b) The gravitational potential energy of the block, measured in joules, is:

$\Delta U_{g,block} = m_{block}\cdot g \cdot (z_{f}-z_{o})$

Where:

$m_{block}$ - Mass of the block, measured in kilograms.

$z_{o}$ - Initial height with respect to ground, measured in meters.

$z_{f}$ - Final height with respect to ground, measured in meters.

According to the Work-Energy Theorem, the work needed to wind the chain plus the block equals the sum of both gravitational potential energies:

$W = \Delta U_{g, chain}+U_{g,block}$

$W = \frac{\lambda \cdot g}{2}\cdot (z_{f}^{2}-z_{o}^{2})+m_{block}\cdot g \cdot (z_{f}-z_{o})$

If we know that $\lambda = 5\,\frac{kg}{m}$ , $g = 9.807\,\frac{m}{s^{2}}$ , $z_{o} = 0\,m$ , $z_{f} = 70\,m$ and $m_{block} = 35\,kg$ , the work required to wind the chain onto the cylinder if a block is attached to the end of the chain is:

$W = \frac{\left(5\,\frac{kg}{m} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}{2}\cdot [(70\,m)^{2}-(0\,m)^{2}]+(35\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (70\,m-0\,m)$

$W = 144162.9\,J$

The work required to wind the chain plus the block is 144162.9 joules.

Answer from: Quest

a) are muscles that have bands.

happy to

pls mark as brainliest

Answer from: Quest

answer would be letter choice (a), a ball resting on a shelf. would be another example of potential energy > stored energy > not moving.

a ball spinning on a finger > kinetic energy > moving energy

a ball rolling on the ground > kinetic energy > moving energy

a ball flying through the air > kinetic energy > moving energy

hope that : )

Another question on Physics

Physics, 21.06.2019 14:10

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate

Answers: 1

Answer

Physics, 21.06.2019 19:40

Ogle–2013–blg–0723 is an exoplanet that is similar to earth in size and proximity to its star. this exoplanet has mass m=4.18×1024kg and radius r=5.66×106m. an astronaut whose weight on earth is w=735n lands on the planet. a. calculate m, the mass of the astronaut. b. calculate gp? , the acceleration due to gravity on the surface of ogle–2013–blg–0723. c. calculate wp? , the weight of the astronaut on the surface of ogle–2013–blg–0723. d. calculate v, the minimum velocity required to put an object into orbit above ogle–2013–blg–0723. e. calculate t, the time required to complete an orbit around ogle–2013–blg–0723.

Answers: 3

Answer

Physics, 22.06.2019 06:30

The mini-refrigerator fire was most likely caused by what type of wiring?

Answers: 2

Answer

Physics, 22.06.2019 16:00

What is friction? how does it affect the motion of an object?

Answers: 1

Answer

You know the right answer?

A 70-m-long chain hangs vertically from a cylinder attached to a winch. Assume there is no friction...