What distance will a vehicle travel before coming to a complete stop from a speed of 70 mph, (a) When the vehicle is traveling on a level roadway with no grade, (b-1) When the vehicle is traveling uphill on a roadway of constant grade = 0.10, (b-2) If the roadway grade is not constant but starts at 0.10 uphill and decreases to 0 at a continuous rate, would the braking distance be equal to, greater than, or less than that in the case of a constant 0.10 uphill grade, (c) When the vehicle is traveling downhill on a roadway of constant grade = 0.10.

(a), The SSD will be 723.9 ft.

(b-1), The SSD will be 620.2 ft.

(b-2), The SSD will be

(c), The SSD will be 910.5 ft.

Explanation:

Given that,

Speed = 70 mph

Suppose, a perception reaction time of 2.5 sec and the coefficient of friction is 0.35

We need to calculate the stopping sight distance

Using formula of SSD

Where, v = speed of vehicle

t = perception reaction time

f = coefficient of friction

g = gradient of road

(a). If the gradient of road is zero.

Then, the stopping sight distance will be

(b-1). If the gradient of road is 0.1

Then, the stopping sight distance will be

(b-2). If the grade continuously decrease then the SSD will be increase.

But if the grade is increase then the SSD will be decrease and for flat grade the SSD will be more.

So, The SSD will be

(c). When the vehicle is traveling downhill on a roadway of constant grade then the vehicle take will be more SSD

So, The SSD will be

Hence, (a), The SSD will be 723.9 ft.

(b-1), The SSD will be 620.2 ft.

(b-2), The SSD will be

(c), The SSD will be 910.5 ft.

yeet youwelcome broo

because it says use -2,0,and 2 for x, we can plug those numbers into the equation. y/4=3/4(-2)+2   y/4= -1 1/2 +2 now to get x by itself, we can multiply each side by 4. y=-6+8 which equals y=2 when x=-2. now you can do the same thing with 0 and 2 as x. you get y=8 when x=0 and y=14 when x=2.

x   |   y

-2 |   2

0   |   8

2   |   14