subject
Physics, 02.10.2020 19:01 nikkera03

Turn friction on, and get the object accelerating with an applied force. Then, take the applied force away. Is there any acceleration? If there is acceleration, what direction is this acceleration in? (Is it going on the same direction as the object’s motion or the opposite direction? How do you know?)

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 12:10
Light traveling in water, nwater = 1.33, strikes a plastic block at an angle of incidence of 51.4°; part of the beam is reflected and part is refracted. if the index of refraction of the plastic is 2.0, what is the angle made by the reflected and refracted beams?
Answers: 2
question
Physics, 22.06.2019 18:30
Two 2.0-cm-diameter disks face each other, 1.0 mm apart. they are charged to ±10 nc. what is the electric field strength between the disks? a proton is shot from the negative disk toward the positive disk. what launch speed must the proton have to just barely reach the positive disk?
Answers: 1
question
Physics, 22.06.2019 19:40
Uranium has two naturally occurring isotopes. 238u has a natural abundance of 99.3% and 235u has an abundance of 0.7%. it is the rarer 235u that is needed for nuclear reactors. the isotopes are separated by forming uranium hexafluoride uf6, which is a gas, then allowing it to diffuse through a series of porous membranes. 235uf6 has a slightly larger rms speed than 238uf6 and diffuses slightly faster. many repetitions of this procedure gradually separate the two isotopes. what is the ratio of the rms speed of 235uf6 to that of 238uf6? express your answer to five significant figures.
Answers: 3
You know the right answer?
Turn friction on, and get the object accelerating with an applied force. Then, take the applied forc...
Questions
question
Spanish, 10.03.2021 01:00
question
Mathematics, 10.03.2021 01:00
Questions on the website: 13722363