Physics, 02.09.2020 04:01 07corcum85504

A light-rail train going from one station to the next on a straight section of track accelerates from rest at 1.1 m/s^2 for 20s. It then proceeds at constant speed for 1100m before slowing down at 2.2m/s^2 until it stops at the station. A) What is the distance between stations? B) How much time does it take the train to go between the stations?

Answers: 2

Show answers

Answers

Answer from: chevysilverado3464

A) The distance between the stations is 1430m

B) The time it takes the train to go between the stations is 80s

Explanation:

First we will calculate the distance covered for the first 20s.

From one the equations of kinematics for linear motion

$S = ut + \frac{1}{2}at^{2} \\$

Where is distance traveled

is the initial velocity

is time

and is acceleration

Since the train starts from rest, = 0 m/s

Hence, for the first 20s

a = 1.1 m/s²; t = 20s, = 0 m/s

∴ $S = ut + \frac{1}{2}at^{2} \\$ gives

$S = (0)(20) + \frac{1}{2}(1.1)(20)^{2}$

$S = \frac{1}{2}(1.1)(20)^{2}$

S = 220m

This is the distance covered in the first 20s.

The train then proceeds at constant speed for 1100m.

Now, we will calculate the speed attained here

From

v = u +at

Where is the final velocity

Hence,

v = 0 + 1.1(20)

v = 1.1(20)

v = 22 m/s

This is the constant speed attained when it proceeds for 1100m

The train then slows down at a rate of 2.2 m/s² until it stops

We can calculate the distance covered while slowing down from

$v^{2} = u^{2} + 2as$

The initial velocity, here will be the final velocity before it started slowing down

∴ = 22 m/s

The final velocity will be 0, since it came to a stop.

∴ = 0 m/s

a = - 2.2 m/s² ( - indicates deceleration)

Hence,

$v^{2} = u^{2} + 2as$ gives

$0^{2} =22^{2} +2(-2.2)s$

$0=22^{2} - (4.4)s\\4.4s = 484\\s = \frac{484}{4.4} \\s = 110m$

This is the distance traveled while slowing down.

A) The distance between the stations is

220m + 1100m + 110m

= 1430m

Hence, the distance between the stations is 1430m

B) The time it takes the train to go between the stations

The time spent while accelerating at 1.1 m/s² is 20s

We will calculate the time spent when it proceeds at a constant speed of 22 m/s for 1100m,

From,

$Speed =\frac{Distance}{Time}\\$

Then,

$Time = \frac{Distance}{Speed}$

$Time = \frac{1100}{22}$

Time = 50 s

And then, the time spent while decelerating (that is, while slowing down)

From,

$v = u + at\\0 = 22 +(-2.2)t\\2.2t = 22\\t = \frac{22}{2.2} \\t= 10 s$

This is the time spent while slowing down until it stops at the station.

Hence, The time it takes the train to go between the stations is

20s + 50s + 10s = 80s

The time it takes the train to go between the stations is 80s

Answer from: Quest

explanation:

as the height from which the ruler was dropped increased, the speed of the ruler at ryan's hand increased.

Answer from: Quest

Where are the options ?

Another question on Physics

Physics, 21.06.2019 16:30

Which statement best describes resistance? resistance is a. how well a current will flow in a material and is measured in volts. b. how well a material conducts an electrical charge and is measured in ohms. c. the ability of a material to attract a positive charge to create a current. d. the ability of a material to repel neutral charges and is measured in ohms.

Answers: 3

Answer

Physics, 21.06.2019 22:50

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

Answers: 2

Answer

Physics, 22.06.2019 09:50

Which statement correctly describes the current in a circuit that is made up of any two resistors connected in parallel with a battery? a. the current in the battery and in each resistor is the same b. the current the battery equals to the sum of the currents in the resistors c.the current in the battery is less than the current in either resistor d. the current in the battery equals to the product of the currents in the resistors

Answers: 1

Answer

Physics, 22.06.2019 12:30

Apositive charge moves in the direction of an electric field. which of the following statements are true? check all that apply. check all that apply. 1.the potential energy associated with the charge decreases. 2. the electric field does positive work on the charge. 3. the electric field does negative work on the charge. 4. the potential energy associated with the charge increases. 5. the electric field does not do any work on the charge. 6. the amount of work done on the charge cannot be determined without additional information.

Answers: 1

Answer

You know the right answer?

A light-rail train going from one station to the next on a straight section of track accelerates fro...

Questions