subject
Physics, 12.06.2020 19:57 lin550

What do the variables s1 and s2 stand for in physics? I WILL MARK BRIANLIEST PLEASE HALP


What do the variables s1 and s2 stand for in physics? I WILL MARK BRIANLIEST PLEASE HALP

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 10:00
**urgent** roberto plans to use two transformers to reduce a voltage of 120 v to 4 v. he uses a transformer that has 300 coils in the primary winding and 50 coils in the secondary winding. he has four other transformers, as listed in the table. which transformer should roberto use to have an ending voltage of 4 v? a- w b-xc- yd- z
Answers: 1
question
Physics, 22.06.2019 16:00
Fill in the blanks with the numbers is a measure of the resistance to flow. a high liquid has a high resistance to flow and flows slowly. the ancients thought everything in the world was made of 4 we now know that there are 94 naturally occurring and scientists have created another 24 i am certain they will create even more. honey flows slowly because it has a high to flowing. a can be separated by physical means because it contains more than one pure substance and 2 pure substances are not chemically bonded to each other. a cannot be separated by physical means. all matter is made up of all elements are with the same number of protons. if it is just a single or many bonded together, if all of them have the same number of protons, it is an element. in a piece of pure iron metal, all the are joined together, that piece of iron metal is called elemental iron. a single of iron is called elemental iron. a mixture has differences from place to place. we might need a microscope to see them or they might be obvious to the unaided eye. there are surfaces separating it into different phases. a mixture is the same everywhere. it is uniform. there are no surfaces separating it into different phases. if different kinds of atoms (different elements) are bonded together by their electrons, it is called a there are physical means of to isolate the different pure substances in a mixture and there are chemical means of to isolate the different elements in a compound. 1. element 2. compound 3. mixture 4. heterogeneous 5. homogeneous 6. pure substance 7. atoms 8. separation 9. viscosity 10. resistance
Answers: 3
question
Physics, 22.06.2019 23:30
An electric power distributor charges residential customers $0.10 per kilowatt-hour (kwh). the company advertises that "green power" is available in 150 kwh blocks for an additional $4 per month. (green power is generated from solar, wind power, and methane sources.) if a certain customer uses an average of 391 kwh per month and commits to one monthly 150 kwh block of green power, what is her annual power bill
Answers: 1
question
Physics, 23.06.2019 00:40
Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*
Answers: 1
You know the right answer?
What do the variables s1 and s2 stand for in physics? I WILL MARK BRIANLIEST PLEASE HALP
...
Questions
question
Physics, 12.02.2020 22:23
question
History, 12.02.2020 22:24
question
Mathematics, 12.02.2020 22:24
Questions on the website: 13722367