1 Point
Your washer has power of 400 watts, and your dryer has a power of 2200
watts. How much energy do you use to clean a load of clothes in 45 minutes
of washing and 1 hour of drying?
A. 1.50 x 103 J
B. 1.64 x 107 j
O C. 2.73 x 103 J
D. 9.00 x 106 J
SUBMAR

Aweight lifter raises a 1600 n barbell to a height of 2.0 meters. how much work was done? w = fd question 6 options: 3000 joules 30 joules 320 joules 3200 joules

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.