A sheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200C and is permitted to achieve a steady-state diffusion condition. The diffusion coefficient for nitrogen in steel at this temperature is 6 10-11 m2/s, and the diffusion flux is found to be 1.2 10-7 kg/m2 -s. Also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3. How far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3? Assume a linear concentration profile.
Answers: 1
Physics, 21.06.2019 17:50
Which describes an image that can be produced by a concave lens? the image is real and smaller than the object. the image is virtual and larger than the object. the image is virtual and smaller than the object. the image is real and larger than the object.
Answers: 3
Physics, 22.06.2019 11:00
If a simple machine reduces the strength of a force, what must be increased?
Answers: 3
Physics, 22.06.2019 15:20
Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2
Answers: 2
Physics, 22.06.2019 16:30
Acalorimeter uses the principle that thermal energy flows from hotter material to colder material until both reach the same
Answers: 1
A sheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200C and is permitted to a...
Physics, 08.09.2020 23:01
History, 08.09.2020 23:01
Mathematics, 08.09.2020 23:01