subject
Physics, 05.05.2020 06:18 jetthehawk9861

Unpolarized light with an average intensity of 845 W/m2 moves along the x-axis when it enters a Polarizer A with a vertical transmission axis (along the y-axis). The transmitted light then enters a second polarizer, B at an angle in the y-z plane . The light that exits the second polarizer is found to have an average intensity of 275 W/m2. What is the orientation angle of the second polarizer (B) relative to the first one (A)

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 16:10
Alow cost, low earth orbit (leo) satellite is to be fabricated at a university, for subsequent launch by rocket. what are the constraints and objectives for selection of a material suitable for the satellite bus (i.e. the structure)? explain each in brief. (15 marks) b)suggest sources of data which could support the selection of materials for applications in space. (5 marks) c) set weights for the objectives listed in (2a) using the digital logic method. (5 marks)
Answers: 1
question
Physics, 21.06.2019 22:00
In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?
Answers: 2
question
Physics, 22.06.2019 11:10
Rank the automobiles based on the magnitude of the force needed to stop them, from largest to smallest.2000 kg car going 5m/s500 kg car going 20 m/s1000 kg car going20m/s500 kg car going10m/s1000 kg car going10/s4000 kg car going 5m/s 0 0 603
Answers: 3
question
Physics, 22.06.2019 15:00
When is a current produced? when the terminals of an electrochemical cell are connected by a wire if the electric circuit is opened in an electrochemical cell if the electrolyte is removed from an electrochemical cell when the electrodes are reversed in an electrochemical cell
Answers: 1
You know the right answer?
Unpolarized light with an average intensity of 845 W/m2 moves along the x-axis when it enters a Pola...
Questions
question
Chemistry, 29.05.2021 02:10
question
Mathematics, 29.05.2021 02:10
question
Mathematics, 29.05.2021 02:10
Questions on the website: 13722367