subject
Physics, 05.05.2020 12:40 heavenmcgautha

How much voltage is required to run 0.054 A of current through a 15 2
resistor? Use AV = IR.
O A. 0.81 V
O B. 1.2 V
O c. 2.8x10²v
O D. 3.6 x 10-3 v

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 16:40
An airplane flying parallel to the ground undergoes two consecutive displacements. the first is 76 km at 39.8◦ west of north, and the second is 156 km at 59.9◦ east of north. what is the magnitude of the plane’s total displacement? answer in units of km. 020 (part 2 of 2) 10.0
Answers: 1
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 18:00
Directions: count the number of atoms. ar co2 na3po4 so3 nac2h3o2
Answers: 1
question
Physics, 22.06.2019 22:30
Materials will have different energies associated with the electrons inside them. this is related to how strongly bound they are by their work function. if we sandwich a material with a very low energy between two materials with a high energy, we create a trap for an electron. if this trap is very narrow in one direction in comparison to the others, this is approximately a 1-dimensional box that confines the electron. what is the lowest energy of an electron in the box if the thinnest direction across the materials is 4.81 nm?
Answers: 3
You know the right answer?
How much voltage is required to run 0.054 A of current through a 15 2
resistor? Use AV = IR.
Questions
question
Mathematics, 18.07.2019 04:30
question
Mathematics, 18.07.2019 04:30
question
Health, 18.07.2019 04:30
Questions on the website: 13722367