Imagine that the satellite described in the problem introduction is used to transmit television signals. You have a satellite TV reciever consisting of a circular dish of radius RRR which focuses the electromagnetic energy incident from the satellite onto a receiver which has a surface area of 5 cm2cm2. How large does the radius RRR of the dish have to be to achieve an electric field vector amplitude of 0.1 mV/mmV/m at the receiver? For simplicity, assume that your house is located directly beneath the satellite (i. e. the situation you calculated in the first part), that the dish reflects all of the incident signal onto the receiver, and that there are no losses associated with the reception process. The dish has a curvature, but the radius RRR refers to the projection of the dish into the plane perpendicular to the direction of the incoming signal

Complete Question

A satellite in geostationary orbit is used to transmit data via electromagnetic radiation. The satellite is at a height of 35,000 km above the surface of the earth, and we assume it has an isotropic power output of 1 kW (although, in practice, satellite antennas transmit signals that are less powerful but more directional).

Imagine that the satellite described in the problem introduction is used to transmit television signals. You have a satellite TV reciever consisting of a circular dish of radius R which focuses the electromagnetic energy incident from the satellite onto a receiver which has a surface area of 5 cm2.

How large does the radius R of the dish have to be to achieve an electric field vector amplitude of 0.1 mV/m at the receiver?

For simplicity, assume that your house is located directly beneath the satellite (i.e. the situation you calculated in the first part), that the dish reflects all of the incident signal onto the receiver, and that there are no losses associated with the reception process. The dish has a curvature, but the radius R refers to the projection of the dish into the plane perpendicular to the direction of the incoming signal.

Give your answer in centimeters, to two significant figures.

 The radius  of  the dish is

Explanation:

  From the question we are told that

     The radius of the orbit is  =

    The power output of the power is  

   The electric vector amplitude is given as

    The area of thereciever  is  

Generally the intensity of the dish is mathematically represented as

Where A is the area orbit which is a sphere so this is obtained as

  Then substituting into the equation for intensity

 Now the intensity received by the dish can be mathematically evaluated as

  Where c is thesped of light with a constant value  

              is the permitivity of free space  with a value  

              is the electric filed on the dish

So  since we are to assume to loss then the intensity of the satellite is equal to the intensity incident on the receiver dish

      Now making the eletric field intensity the subject of the formula

substituting values

The incident power on the dish is what is been reflected to the receiver

Where is the power incident on the dish which is mathematically represented as

And   is the power incident on the dish which is mathematically represented as

Now equating the two

   Making R the subject we have

Substituting values

hello, i am papaguy.

i have found an answer to your question but use it as information.

information: because weak acids/bases have low concentration of hydrogen ions, the addition of water has a large impact on the ph. 2. a difference in 1 unit is a 10x difference in concentration for example; a liquid with ph of 3 is 10x more acidic than a liquid with a ph of 4. therefore, a liquid with a ph of 3 is stronger.

best of luck!

which three statements are true about all alloys?