Answers: 2
Physics, 21.06.2019 21:30
How many seconds does it take a pebble released from rest off a bridge to fall 29.4 m ? what is the pebble's speed when it has fallen 29.4 m ?
Answers: 1
Physics, 22.06.2019 11:30
Which accounts for an increase in the temperature of a gas that is kept a constant volume
Answers: 1
Physics, 23.06.2019 05:00
Which factor listed below most likely results in the loss of genetic variation from small populations? question 2 options: mutation migration genetic recombination genetic drift
Answers: 3
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
What was swimmer c’s average speed...
English, 30.11.2019 19:31
Social Studies, 30.11.2019 19:31
History, 30.11.2019 19:31
Mathematics, 30.11.2019 19:31
Computers and Technology, 30.11.2019 19:31
History, 30.11.2019 19:31
Mathematics, 30.11.2019 20:31
History, 30.11.2019 20:31
Business, 30.11.2019 20:31
Mathematics, 30.11.2019 20:31
Mathematics, 30.11.2019 20:31