A differential thermocouple with sensors at the inlet and the exit of a pump indicates that the temperature of water rises 0.048°f as it flows through the pump at a rate of 1.5 ft3/s. if the shaft power input to the pump is 21.6 hp and the heat loss to the surrounding air is negligible, determine the mechanical efficiency of the pump.

A2 µc charge q1 and a 2 µc charge q2 are 0.3 m from the x-axis. a 4 µc charge q3 is 0.4 m from the y-axis. the distances d13 and d23 are 0.5 m. find the magnitude and direction of the resulting vector r. round your answer to the nearest tenth.

The speed of light can be used to measure the

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.