subject
Physics, 14.04.2020 21:19 burners

A ball can be taped to the rim of a disk of radius R. You start spinning the disk about an axis of rotation that goes through the center of the disk, while the disk sits on a flat frictionless tabletop. At some angular speed max the ball detaches. What is the force required to detach the ball from the disk?

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 05:30
Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n
Answers: 2
question
Physics, 22.06.2019 13:00
At a certain instant after jumping from the airplane a, a skydiver b is in the position shown and has reached a terminal (constant) speed vb = 52 m/s. the airplane has the same constant speed va = 52 m/s, and after a period of level flight is just beginning to follow the circular path shown of radius ρa = 2330 m. (a) determine the velocity and acceleration of the airplane relative to the skydiver. (b) determine the time rate of change of the speed vr of the airplane and the radius of curvature ρr of its path, both as observed by the nonrotating skydiver.
Answers: 3
question
Physics, 22.06.2019 21:00
On a mild saturday morning while people are working inside, the furnace keeps the temperature inside the building at 23degreesc. at noon the furnace is turned off, and the people go home. the temperature outside is a constant 16degreesc for the rest of the afternoon. if the time constant for the building is 3 hr, when will the temperature inside the building reach 18degreesc? if some windows are left open and the time constant drops to 2 hr, when will the temperature inside reach 18degreesc?
Answers: 3
question
Physics, 23.06.2019 13:20
Two wooden members of 80 × 120-mm uniform rectangular cross section are joined by the simple glued scarf splice shown. knowing that β = 22° and that the maximum allowable stresses in the joint are, respectively, 400 kpa in tension (perpendicular to the splice) and 690 kpa in shear (parallel to the splice), determine the largest centric load p that can be applied using mohr's circle. (round the final answer to two decimal places.)
Answers: 1
You know the right answer?
A ball can be taped to the rim of a disk of radius R. You start spinning the disk about an axis of r...
Questions
question
Mathematics, 30.03.2021 22:20
question
Mathematics, 30.03.2021 22:20
Questions on the website: 13722367