Physics, 09.04.2020 03:31 toxsicity

3/20 The winch takes in cable at the rate of 200 mm/s, and this rate is momentarily increasing at 500 mm/s each second. Determine the tensions in the three cables. Neglect the weights of the pulleys.

Answers: 2

Show answers

Answers

Answer from: Maaarii

The tension in the cable T_3 = 993.5 N

The tension in the cable T_2 = 496.75 N

The tension in the cable T_1 = 248.375 N

Explanation:

The diagram attached below depicts the full understanding of what the question is all about.

Now, obtaining the length of cable 1 from the diagram; we have:

$L_1 = s_B + 2 s_A ---------- equation \ (1)$

where;

s_B = distance from the fixed point to point B

s_A = distance from the fixed point to pulley A

From the cable 2 as well.we obtain its length

$L_2 = ( s_W - s_A) + s_W ------- equation \ (2)$

where :

s_W = distance from the fixed point to the weight attached to the pulley

Let differentiate equation (1) in order to deduce a relation between the velocities of A and B with respect to time ;

Since L_1 is constant ; Then:

$\frac{dL_1}{dt} = \frac{ds}{dt}+ 2\frac{ds_A}{dt} ---------- euqation \ (3)$

0 = v_B +2 v_A

where;

v_B = velocity at point B

v_A = velocity at pulley A

Let differentiate equation (2) as well in order to deduce a relation between the velocities of W and A with respect to time :

Since L_2 is constant ; Then:

L_2 = (s_W - s_A) +s_W

$\frac{dL_2}{dt}=2\frac{ds_W}{dt}-\frac{ds_A}{dt} ----------- equation \ (4)$

0 = 2v_W -v_A

where;

v_W = the velocity of the weight

Let differentiate equation (3) in order to deduce a relation between accelerations A and B with respect to time

$\frac{dv_A}{dt} + 2 \frac{dv_A}{dt } = 0$

$a_B +2a_A = 0 --------- equation \ (5)$

$a_A = - \frac{1}{2}a_B$

where;

a_A = acceleration at A

a_B= acceleration at B

Replacing 0.5 m/s ² for a_B in equation (5); then

$a_A = - \frac{1}{2}*0.5$

$a_A = - 0.25 \ m/s^2$

Let differentiate equation (4) in order to deduce a relation between W and A with respect to time

$2\frac{dv__W}{dt}- \frac{dv_A}{dt} = 0$

$2a__W} -a_A = 0 ----------- equation \ (6)$

$a__W }= \frac{1}{2}a_A$

where;

a_W = acceleration of weight W

Replacing - 0.25 m/s² for a_A

$a__W }= \frac{1}{2}*(-0.25)$

$a__W }= -0.125 \ m/s^2$

From the second diagram, if we consider the equilibrium of forces acting on the cylinder in y-direction; we have:

$\sum F_y = ma_y$

mg - T_3 = ma_w

where;

m= mass of the cylinder = 100 kg

T_3 = tension in the string = ???

g = acceleration due to gravity = 9.81 m/s²

a_w = acceleration of the cylinder = $- 0.125 \ m/s^2$

Plugging all values into above equation; we have

(100 × 9.81) - T_3 = 100(-0.125)

T_3 = 993.5 N

∴ The tension in the cable T_3 = 993.5 N

From the third diagram, if we consider the equilibrium of forces acting on the cylinder in y-direction on the pulley ; we have:

$\sum F _y = 0 \\ \\2T_2 -T_3 = 0 \\ \\ T_2 = \frac{T_3}{2}$

where ;

T_2 = tension in cable 2

Replacing 993.5 N for T_3 ; we have

$T_2 = \frac{993.5 \ N}{2}$

$T_2 = 496.75 \ N$

∴ The tension in the cable $T_2 = 496.75 \ N$

From the fourth diagram, if we consider the equilibrium of forces acting on the cylinder in y-direction on the pulley A ; we have

$\sum F _y = 0 \\ \\2T_1 -T_2 = 0 \\ \\ T_1 = \frac{T_2}{2}$

where;

T_1 = tension in cable 1

Replacing 496.75 N for T_2 in the above equation; we have:

$T_1 = \frac{496.75}{2}$

T_1 = 248.375 N

∴ The tension in the cable T_1 = 248.375 N

3/20 The winch takes in cable at the rate of 200 mm/s, and this rate is momentarily increasing at 50

Answer from: Quest

My answer is opptionc, just check with anyone else

Answer from: Quest

mass and volume are the answers you are looking for

Another question on Physics

Physics, 22.06.2019 01:20

An engineer designs a roller coaster so that a car travels horizontally for 152 ft, then climbs 137 ft at an angle of 34.0° above the horizontal. it then moves 137 ft at an angle of 48.0° below the horizontal. if we take the initial horizontal motion of the car to be along the +x-axis, what is the car's displacement? (give the magnitude of your answer, in ft, to at least four significant figures and give the direction of your answer in degrees counterclockwise from the +x-axis.)

Answers: 1

Answer

Physics, 22.06.2019 10:30

In science and physics what is the standard unit of measure for speed?

Answers: 1

Answer

Physics, 22.06.2019 16:30

Place several e-field sensors at a few points on different equipotential lines, and look at the relationship between the electric field and the equipotential lines. which statement is true? 1-at any point, the electric field is perpendicular to the equipotential line at that point, and it is directed toward lines of higher voltages. 2-at any point, the electric field is perpendicular to the equipotential line at that point, and it is directed toward lines of lower voltages. 3-at any point, the electric field is parallel to the equipotential line at that point.

Answers: 1

Answer

Physics, 22.06.2019 17:00

Since the energy was not raising the temperature of the water during these segments, what was the energy used to do instead? your answer must include an explanation of what is happening to the molecules.

Answers: 3

Answer

You know the right answer?

3/20 The winch takes in cable at the rate of 200 mm/s, and this rate is momentarily increasing at 50...

Questions

Physics, 31.03.2021 21:20

3. A 700 kg horse has 4000 J of kinetic energy as it is running. What is the velocity of the horse? K= m. v2 2 < PREVIOUS