Physics, 09.04.2020 02:19 khalilwhite75

A 0.140 m high cylinder

is filled with mercury

(density = 13600 kg/m^3).

What is the pressure at the

bottom of the cylinder?

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 18:10

An insurance company wants to know if the average speed at which men drive cars is higher than that of women drivers. the company took a random sample of 27 cars driven by men on a highway and found the mean speed to be 72 miles per hour with a standard deviation of 2.2 miles per hour. another sample of 18 cars driven by women on the same highway gave a mean speed of 68 miles per hour with a standard deviation of 2.5 miles per hour. assume that the speeds at which all men and all women drive cars on this highway are both approximately normally distributed with unknown and unequal population standard deviations.

Answers: 2

Answer

Physics, 21.06.2019 21:30

Aparticle with mass 1.81×10−3 kg and a charge of 1.22×10−8 c has, at a given instant, a velocity v⃗ =(3.00×104m/s)j^. what are the magnitude and direction of the particle’s acceleration produced by a uniform magnetic field b⃗ =(1.63t)i^+(0.980t)j^?

Answers: 2

Answer

Physics, 22.06.2019 03:30

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Answers: 3

Answer

Physics, 22.06.2019 12:10

Energy flows from the producer level to the level. is called

Answers: 1

Answer

You know the right answer?

A 0.140 m high cylinder

is filled with mercury

(density = 13600 kg/m^3).

Questions