Physics, 02.04.2020 21:32 katherine3084

What is a point of view influence by opinion

Answers: 1

Show answers

Answers

Answer from: Quest

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm. the wire diameter is d = 0.9 mm. the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2) in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

Answer from: Quest

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this

Answer from: Quest

Is a vector quantity that refers to "the rate at which an object changes its position." imagine a person moving rapidly - one step forward and one step back - always returning to the original starting position. while this might result in a frenzy of activity, it would result in a zero velocity. because the person always returns to the original position, the motion would never result in a change in position. since velocity is defined as the rate at which the position changes, this motion results in zero velocity. if a person in motion wishes to maximize their velocity, then that person must make every effort to maximize the amount that they are displaced from their original position. every step must go into moving that person further from where he or she started. for certain, the person should never change directions and begin to return to the starting position.

Answer from: Quest

overcharge is the right answer system

Another question on Physics

Physics, 21.06.2019 15:00

If you were on a jury, do you think you would expect individual characteristics in the evidence? why or why not? what effects might it have if individuals expect to have individuals characteristics presented? this question is for forensic science

Answers: 2

Answer

Physics, 21.06.2019 20:20

When many atoms are split in a chain reaction, a large explosion occurs. this is an example of what type of energy conservation

Answers: 2

Answer

Physics, 22.06.2019 02:00

An object has a weight of 500 on earth what is the mass of this object

Answers: 1

Answer

Physics, 22.06.2019 08:20

The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?

Answers: 2

Answer

You know the right answer?

What is a point of view influence by opinion...

Questions