A conductor of radius r, length l and resistivity p has resistance R. It is melted down and formed into a new conductor, also cylindrical,

with one half the length of the original conductor. The resistance of the new conductor is

(A)16/R

(B)4/R

(C) 4R

(D) 16R

Many machines- including inclined planes such as ramps- increase the strength of the force put into the machine but decrease the distance over which the force is applied.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

On mars a rock falls an unknown vertical distance from a resting position and lands in a crater. if it takes the rock 2.5 seconds to fall, how high is the cliff the rock fell from? mars' surface gravity is 3.8 m/s2. a. 9.5 m b. 11.9 m c. 15.2 m d. 23.8 m