A turntable has a moment of inertia of 3.00 × 10−2 kg·m2 and spins freely on a frictionless bearing at 25.0 rev/min. A 0.600-kg ball of putty is dropped vertically onto the turntable and sticks at a point 0.100 m from the center. What is the new rate of rotation of the system?

The metric unit of electrical power is the watt volt ampere ohm

Asolid cylinder and a cylindrical shell have the same mass, same radius, and turn on frictionless, horizontal axles. the cylindrical shell has light-weight spokes connecting the shell to the axle. a rope is wrapped around each cylinder and tied to blocks of equal masses that are held the same height above the ground. both blocks are released simultaneously. the ropes do not slip. which block hits the ground first? or is it a tie?

Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1) where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. record these velocities, to two decimal places, in table e.