It is desired that the radiation energy emitted by a light source reach a maximum at 470 nm. Determine the temperature of this light source and the fraction of radiation it emits in the visible range (i. e 0.40–0.76 µm)

Niobium forms a substitutional solid solution with vanadium. compute the number of niobium atoms per cubic centimeter for a niobium-vanadium alloy that contains 24 wt% nb and 76 wt% v. the densities of pure niobium and vanadium are 8.57 and 6.10 g/cm3, respectively

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

What must be the same for any two resistors that are connected in series ? a. the potntial diffrence across each b. the rate at which charge moves through each c. the rate at which energy is used by each d. the resistance to the flow of charge of each