Which best describes the runners?

Garreth and Elisa ran the same distance but not the same displacement, Luigi and Jasmine went the same displacement,

and Logan ran faster than Jasmine.

Garreth ran farther than Luigi, Elisa and Jasmine went the same distance, and Logan and Jasmine has the same

displacement in the opposite direction.

Garreth and Elisa ran together, Luigi and Jasmine went the same distance, and Logan and Jasmine have the same

displacement in the opposite direction.

Garreth ran less than Logan, Elisa and Jasmine went ame displacement, and Luigi and Garreth ran together.

Mark this and return

Save and Exit

Next

Submit

9

M

Sign out

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Aman throws a football straight into the air. as it rises, it slows down. which type of energy is the football gaining?

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.