Description: Consider a pressure vessel that is made of two half spherical domes with 1 ft in diameter, and the cylinder portion is 3 ft in length and is subjected to 100 psi pressure. The maximum tensile strength of the material is 55 ksi The factor of safety for this design is 1.5. Problem: Determine the minimum thickness for this design.

0.016 in

Explanation:

1 ft = 12 in. So the radius r = 6 in

3 ft = 36 in

55 ksi = 1000 psi

The longitudinal stress of the vessel can be calculated as the following:

where p = 100 psi is the internal pressure, t is the wall thickness

The hoop stress can be calculated as the following

As 0.011 > 0.0054 we will pick t  = 0.011 as design to withstand the maximum stress. Taking into account of factor of safety design, the appropriate thickness is 0.011*1.5 = 0.016 in

the box does not move because you need to use a force greater than 300 n. you are only using 50 n. it needs to at least be 301 n for the box to move because then it is an unbalanced force and it will move the way that the greater force is pushing it. if you use only 300 n it will be a balanced force and will not move because the force you are exerting on the   box is the same as its force.

hope this !

im sorry if i went too in depth, i am going to include a link to a video on khan academy that will explain this.   hope that you like the video and that it explains more in detail to you.

that is the link.

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!