Physics, 16.03.2020 20:53 darkpain4371

1. A 12 weather rocket generates a thrust of 200 . The rocket, pointing upward, is clamped to the top of a vertical spring, 550 / . The spring is anchored to the ground. a. Initially, before the engine is ignited, the rocket sits at rest on the top of the spring. How much is the spring compressed? b. After the engine is ignited, what is the rocket’s speed when the spring has stretched 40 ?

Answers: 1

Show answers

Answers

Answer from: thibeauxkristy

a) 0.214 m (21.4 cm)

b) 1.8 m/s

Explanation:

When the rocket sits on the spring, the weight of the rocket (acting downward) is balanced by the restoring force on the spring (upward).

So, we can write:

mg=kx

where:

- The term on the left is the weight of the rocket, with

m = 12 kg is its mass

g=9.8 m/s^2 is the acceleration due to gravity

- The term on the right is the restoring force, where

k = 550 N/m is the spring constant

x is the compression of the spring

And solving for x, we find:

$x=\frac{mg}{k}=\frac{(12)(9.8)}{550}=0.214 m$

Which corresponds to 21.4 cm.

We can solve this part by using the law of conservation of energy.

At the beginning, when the engine is off, the rocket is at rest sitting on the spring; the total energy of the system therefore is the elastic potential energy stored in the spring, which is:

$E=\frac{1}{2}kx^2=\frac{1}{2}(550)(0.214)^2=12.6 J$

Then, when the engine is turned on, the rocket stars moving upward. The string will move from a position of x = -21.4 cm (compression) to a position of x = +40 cm (0.40 m, stretching), so the new elastic potential energy of the spring will be

$E'=\frac{1}{2}kx'^2 = \frac{1}{2}(550)(0.40)^2=44 J$

Moreover, the work done by the thurst of the rocket, of magnitude F = 200 N upward, is equal to the magnitude of F time the displacement of the rocket, so

W=F(x'-x)=(200)(0.40-(-0.214))=122.8 J

Also, the increase in gravitational potential energy of the rocket is

$\Delta PE=mg(x'-x)=(12)(9.8)(0.40-(0.214))=72.2 J$

So, according to the law of conservation of energy, the final kinetic energy of the rocket will be:

$KE=E-E'+W-\Delta PE=12.6-44+122.8-72.2=19.2 J$

The kinetic energy can be rewritten as

$KE=\frac{1}{2}mv^2$

where m = 12 kg is the mass of the rocket; and solving for v, we find

$v=\sqrt{\frac{2KE}{m}}=\sqrt{\frac{2(19.2)}{12}}=1.8 m/s$

Answer from: Quest

Protons have a positive charge and, collectively, give an element its atomic number.

Answer from: Quest

distance on the y-axis and time on the x-axis.

explanation:

the instantaneous velocity = change in position/time taken

the slope of the graph should give instantaneous velocity.

slope of a graph = change in value of y -axis / change in values of x -axis

comparing both the equations

change in value of y -axis = change in position

change in values of x -axis = time taken

so position values should be on the y axis and time values should be on the x axis.

distance on the y-axis and time on the x-axis.

Another question on Physics

Physics, 22.06.2019 05:10

Which situation will have the highest resistance? a.long wire and high temperatureb.short wire and high temperaturec.long wire and cold temperaturedshort wire and low temperature

Answers: 2

Answer

Physics, 22.06.2019 21:20

An electron is ejected into a horizontal uniform e⃗ field at a parallel horizontal velocity of v0. assume the electron's initial position x0, initial velocity v0, time t, magnitude of electric field e, electron's mass m, and the magnitude of the electron's charge |e|. ignore the force that earth exerts on the electron. assume the e⃗ field is in the same direction as the initial velocity. part a define the equation for the electron's velocity. express your answer in terms of the variables v0, |e|, t, e, and m.

Answers: 3

Answer

Physics, 23.06.2019 06:00

Atoms in a molecule are bonded together by sharing gaining or losing_

Answers: 2

Answer

Physics, 23.06.2019 08:30

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28

Answers: 2

Answer

You know the right answer?

1. A 12 weather rocket generates a thrust of 200 . The rocket, pointing upward, is clamped to the to...

Questions