A technician attaches one lead of a digital voltmeter to the ground terminal of the TP sensor and the other meter lead to the negative terminal of the battery. The ignition is turned on, engine off, and the meter displays 37.3 mV. Technician A says this is the signal voltage and is a little low. Technician B says the TP sensor ground circuit has excessive resistance. Who is right?

The image shows a pendulum in simple harmonic motion the pendulum starts at a and swing to e

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n