A dielectric object that has a quasi-permanent polarization when the applied field is 0 is called an electret. Consider a uniformly polarized electret in the shape of a cylinder of height h and radius 10h. The polarization in the dielectric is P k^, where k^ is parallel to the cylinder axis.

(a) Sketch the electric field lines.
(b) Calculate the electric field E at the center of the cylinder. Because the radius is large compared to the height, you may neglect edge effects

If the temperature were raised very high, classically what would we expect the heat capacity per object to be for this one-dimensional system? give a numerical value. chigh t = __ j/k/object (one reason for the discrepancy is that the high-temperature limit assumes that the number of oscillators is large (n > > 1), which is not the case in this tiny system.)

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

What equation is used to calculate the weight of an object on a plant ?