A 0.3-cm-thick, 12-cm-high, and 18-cm-long circuit board houses 80 closely spaced logic chips on one side, each dissipating 0.04 W. The board is impregnated with copper fillings and has an effective thermal conductivity of 30 W/m·K. All the heat generated in the chips is conducted across the circuit board and is dissipated from the back side of the board to a medium at 40°C, with a heat transfer coefficient of 40 W/m2 ·K. (a) Build up the thermal resistance look and determine the temperatures on the two sides of the circuit board. (b) Now a 0.2-cm-thick, 12-cm-high, and 18- cm long aluminum plate (k = 237 W/m·K) with 864 2-cm-long aluminum pin fins of diameter 0.25 cm is attached to the back side of the circuit board with a 0.02-cm-thick epoxy

You have been consulted by the mobile phone company hookup about a new augmented reality product called “brows”. they want to develop an alternative to google glasses, which, you recall, is a proposed new product which plans to superimpose a whole range of wireless google services over the user’s ordinary vision of the world. these appear in little circles and ovals, and let you phone people, take photographs, navigate across cities and inside buildings, find shops and update your social media. brows would do this too, but not be limited to special google services. the user would wear a small cylinder-shaped device designed to fit on top of their existing eyewear (glasses or sunglasses). it would project a reversed image onto the inside of the lenses, the reflection of which would be in focus for the user. instead of voice control, the user would control the device by eye and neck movements, which the device would track. the device would connect via bluetooth to the user’s phone, which would supply most of the computing power and wireless connectivity. hookup also wants to know what existing services would be most in demand, and which would not work well with brows. using your knowledge of augmented reality, wearable technology and interface design, is the project feasible? if not, why not? if feasible, how could the product need to be modified for a better experience?

Part f - example: finding two forces (part i) two dimensional dynamics often involves solving for two unknown quantities in two separate equations describing the total force. the block in (figure 1) has a mass m=10kg and is being pulled by a force f on a table with coefficient of static friction îľs=0.3. four forces act on it: the applied force f (directed î¸=30â above the horizontal). the force of gravity fg=mg (directly down, where g=9.8m/s2). the normal force n (directly up). the force of static friction fs (directly left, opposing any potential motion). if we want to find the size of the force necessary to just barely overcome static friction (in which case fs=îľsn), we use the condition that the sum of the forces in both directions must be 0. using some basic trigonometry, we can write this condition out for the forces in both the horizontal and vertical directions, respectively, as: fcosî¸â’îľsn=0 fsinî¸+nâ’mg=0 in order to find the magnitude of force f, we have to solve a system of two equations with both f and the normal force n unknown. use the methods we have learned to find an expression for f in terms of m, g, î¸, and îľs (no n).

The passage that directs air to the lungs is called a. diaphragm. b. larynx. c. bronchi. d. pharynx.