Physics, 10.03.2020 09:02 mrashrafkotkaat

A bimetallic strip, consisting of metal G on the top and
metal H on the bottom, is rigidly attached to a wall at the left. The coefficient of linear
thermal expansion for metal G is less than that of metal H. If the strip is uniformly
heated, it will

Answers: 1

Show answers

Answers

Answer from: Soloaa

The length of metal H will increase more than the length of metal G.

The given problem is based on the concept of thermal expansion. When a certain metal is heated, its length increases according to the thermal expansion equation,

$\dfrac{\Delta L}{L}= \alpha \times \Delta T$

Here, $\Delta L$ and $\Delta T$ are the change in length and change in temperature respectively and L is the original length. And $\alpha$ is the thermal expansion coefficient.

Therefore, we see that the larger the coefficient of linear expansion, the more the metal length increases.

Here we have two metals, G on the top of the strip and H on the bottom, and the coefficient of thermal expansion for metal G is less than that of metal H. So this means that as the strip is heated, the length of metal H (on the bottom) will increase more than the length of metal G (on top): and therefore, the strip will bend towards the top (with metal G in the inside of the curve, while metal H on the outside).

Thus, we can conclude that the length of metal H will increase more than the length of metal G.

Learn more about the thermal expansion here:

link

Answer from: mjam85877

The strip will bend towards the top

Explanation:

When a certain metal is heated, its length increases according to the equation

$\frac{\Delta L}{L}=\alpha \Delta T$

where

$\Delta L$ is the increase in length

L is the initial length

$\alpha$ is the coefficient of linear expansion

$\Delta T$ is the change in temperature

Therefore, we see that the larger the coefficient of linear expansion, the more the metal length increases.

Here we have two metals, G on the top of the strip and H on the bottom, and the coefficient of thermal expansion for metal G is less than that of metal H, so

$\alpha_G$

This means that as the strip is heated, the length of metal H (on the bottom) will increase more than the length of metal G (on top): and therefore, the strip will bend towards the top (with metal G in the inside of the curve, while metal H on the outside).

Answer from: Quest

Go to the bathroom and vape

Answer from: Quest

the rearrangement of particles in a physical change. hope this

Another question on Physics

Physics, 21.06.2019 21:30

Apendulum has a mass of 1.5 kg and starts at a height of 0.4 m. if it is released from rest, how fast is it going when it reaches the lowest point of its path? acceleration due to gravity is g = 9.8 m/s2. a. 2.8 m/s b. 0 m/s c. 5.9 m/s d. 4.3 m/s

Answers: 1

Answer

Physics, 22.06.2019 02:30

The particle in a two-dimensional well is a useful model for the motion of electrons around the indole ring (3), the conjugated cycle found in the side chain of tryptophan. we may regard indole as a rectangle with sides of length 280 pm and 450 pm, with 10 electrons in the conjugated p system. as in case study 9.1, we assume that in the ground state of the molecule each quantized level is occupied by two electrons. (a) calculate the energy of an electron in the highest occupied level. (b) calculate the frequency of radiation that can induce a transition between the highest occupied and lowest unoccupied levels. 9.27 electrons around the porphine ring (4), the conjugated macrocycle that forms the structural basis of the heme group and the chlorophylls. we may treat the group as a circular ring of radius 440 pm, with 20 electrons in the conjugated system moving along the perimeter of the ring. as in exercise 9.26, assume that in the ground state of the molecule quantized each level is occupied by two electrons. (a) calculate the energy and angular momentum of an electron in the highest occupied level. (b) calculate the frequency of radiation that can induce a transition between the highest occupied and lowest unoccupied levels.

Answers: 1

Answer

Physics, 22.06.2019 13:40

Which of the following is not a transverse wave? a) soundb) lightc) radiod) all of thesee) none of these

Answers: 1

Answer

Physics, 23.06.2019 02:00

Calculate the numbers of photons having a wavelength of 10.0 mm required to produce 1.0 kj of energycalculate the numbers of photons having a wavelength of 10.0 mm required to produce 1.0 kj of energy

Answers: 1

Answer

You know the right answer?

A bimetallic strip, consisting of metal G on the top and
metal H on the bottom, is rigidly att...

Questions