Usually wire resistance can be neglected. But we see the effect of it sometimes when a light dims as another high-current device is turned on. In the fridge, the bulb will put out a little less power when the switch to the compressor motor is turned on.
a. The voltage source (wiggly circled curve) is 120 V (treat it like a battery) and the wire resistance is 0.5 ohms. The bulb is rated as "75W", which means its power is 75W when connected to 120 V. What is the resistance of the bulb? (ohms)
b. When the switch to the motor is open (preventing that branch of the circuit from receiving current, so you can pretend it is not even there), find the power consumed by the bulb, which should be a little lower than 75W because of the wire resistance. (W)

Me ! a 2 µc charge q1 and a 2 µc charge q2 are 0.3 m from the x-axis. a 4 µc charge q3 is 0.4 m from the y-axis. the distances d13 and d23 are 0.5 m. find the magnitude and direction of the resulting vector r. round your answer to the nearest tenth.

Afixed electric space heater wired by a cable with an ampacity of 30 a should draw a maximum current of a. 30 a. b. 24 a. c. 15 a. d. 27 a.

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc