The spring of a spring gun has force constant k =400 N/m and negligible mass. The spring is compressed6.00 cm and a ball with mass 0.0300 kg isplaced in the horizontal barrel against the compressed spring. Thespring is then released, and the ball is propelled out the barrelof the gun. The barrel is 6.00 cm long, so the ballleaves the barrel at the same point that it loses contact with thespring. The gun is held so the barrel is horizontal.
Calculate the speed with which the ballleaves the barrel if you can ignore friction.
Calculate the speed of the ball as it leavesthe barrel if a constant resisting force of 6.00 Nacts on the ball as it moves along the barrel.
For the situation in part (b), at whatposition along the barrel does the ball have the greatest speed?(In this case, the maximum speed does not occur at the end of thebarrel.)
What is that greatest speed?

a) 6.9 m/s

b) 4.9 m/s

c) After 4.50 cm

d) 5.2 m/s

Explanation:

a)

In this case, there is no resistive force. Therefore, according to the law of conservation of energy, all the initial elastic potential energy stored in the spring when it is compressed is converted into kinetic energy of the ball as it leaves the barrel; so we can write:

where:

k = 400 N/m is the spring constant

x = 6.00 cm = 0.06 m is the compression of the spring

m = 0.03 kg is the mass of the ball

v is the velocity of the ball as it leaves the barrel

Solving the equation, we can find the speed of the ball:

b)

In this case, there is a constant resistive force of

acting on the ball as it moves along the barrel.

The work done by this force on the ball is:

where

d = 6.00 cm = 0.06 m is the length of the barrel

And where the negative sign is due to the fact that the force is opposite to the motion of the ball

Substituting,

Therefore, part of the initial elastic potential energy stored in the spring has been converted into thermal energy due to the resistive force. So, the final kinetic energy of the ball will be less than before:

And solving for v, we find the new speed:

c)

The (forward) force exerted by the spring on the ball is

where

k = 400 N/m

x is the distance covered by the ball

is the maximum displacement of the spring

While the (backward) resistive force is instead

So the net force on the ball is

The term prevails at the beginning, so the ball continues accelerating forward, until this term becomes as small as : after that point, the negative resistive force will prevail, so the ball will start delecerating. Therefore, the greatest speed is reached when the net force is zero; so:

d)

After the ball has covered a distance of

x = 0.045 m

The work done by the resistive force so far is:

The total elastic potential energy of the spring at the beginning was

While the elastic potential energy left now is

So, the kinetic energy now is:

And by using the equation

We can find the greatest speed:

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this

speed of light in vacuum is 300,000 km/s

speed of light in other mediums is given by the expression v = c/n, where c is the speed of light in vacuum and n is the refractive index of medium.

for the first medium v = 200,000 km/s

  so, refractive index of medium = 300000/200000 = 1.5

    1.5 refractive index is usually for glass. so first medium is glass.

for the second medium v = 250,00 km/s

so, refractive index of medium = 300000/250000 = 1.2

    1.2 refractive index is usually for water. so second medium is water.

for the third medium v = 0 km/s

so, refractive index of medium = 300000/0 = ∞

    ∞ refractive index is usually for opaque mediums. so third medium is opaque medium.