In a manufacturing process, a large, cylindrical roller is used to flatten material fed beneath it. The diameter of the roller is 1.00 m and while being driven into rotation around a fixed axis, its angular position is expressed as
θ = 2.50t2 - 0.600t3
where θ is in radians and t is in seconds.
a) Find the maximum angular speed of the roller
b) what is the maximum tangential speed of the point an the rim of the roller?
c) at what time t should the driven force be removed from the roller so that the roller does not reverse its direction of rotation?
d) Through how many rotations has the roller turned between t=0 and the time found in part c?

A33.1 g copper object is launched from a 1.5 m 30° steel incline positioned on the floor by being pulled up a string attached to a 50.0 g mass suspended vertically over a pulley. the object is projected towards a glass table where it lands when it is at the point along its trajectory with the lowest speed. it comes to a halt when it clears the opposite edge of the table. it then falls and lands on 9 physics texts each 5 cm thick that are stacked on the floor on the opposite side of the table. assume that the table does not have a ledge and the rectangular object experiences 0.05 n of air resistance as it falls towards the books. how far and how long did the object travel and how fast does it hit the books. assume that at the moment the copper object leaves the incline, the massless string and ideal pulley break off

Part a constants huck finn walks at a speed of 0.60 m/s across his raft (that is, he walks perpendicular to the raft's motion what is huck's velocity (speed and direction) relative to the river bank? express your answer to three significant figures and include the appropriate units. relative to the shore)

Iwill give 30 points to whoever answers ! what is the formula for actual mechanical advantage and ideal mechanical advantage?