While watching the crane in operation, an observer mentions to you that for a given load there is a maximum angle between 0° and 90° that the crane arm can make with the horizontal without tipping the crane over. Is this correct?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

What are atoms of the same element with varying number of neutrons

Within a pendulum, as potential energy decreases, energy increases. a. heat b. kinetic c. frictional d. gravitational