Physics, 27.02.2020 20:15 babyduckies37

A 44-cm-diameter water tank is filled with 35 cm of water. A 3.0-mm-diameter spigot at the very bottom of the tank is opened and water begins to flow out. The water falls into a 2.0-cm-diameter, 40-cm-tall glass cylinder. As the water falls and creates noise, resonance causes the column of air in the cylinder to produce a tone at the column's fundamental frequency. What are:

a. the frequency
b. the rate at which the frequency is changing (Hz/s) when the cylinder has been filling for 4.0 s? You can assume that the height of the water in the tank does not appreciably change in 4.0 s.

Answers: 1

Show answers

Answers

Answer from: ste78

The frequency = 521.59 Hz

The rate at which the frequency is changing = 186.9 Hz/s

Explanation:

Given that :

Diameter of the tank = 44 cm

Radius of the tank = $\frac{d}{2}$ = $\frac{44}{2}$ = 22 cm

Diameter of the spigot = 3.0 mm

Radius of the spigot = $\frac{d}{2}$ = $\frac{3.0}{2}$ = 1.5 mm

Diameter of the cylinder = 2.0 cm

Radius of the cylinder = $\frac{d}{2}$ = $\frac{2.0}{2}$ = 1.0 cm

Height of the cylinder = 40 cm = 0.40 m

The height of the water in the tank from the spigot = 35 cm = 0.35 m

Velocity at the top of the tank = 0 m/s

From the question given, we need to consider that the question talks about movement of fluid through an open-closed pipe; as such it obeys Bernoulli's Equation and the constant discharge condition.

The expression for Bernoulli's Equation is as follows:

$P_1+\frac{1}{2}pv_1^2+pgy_1=P_2+\frac{1}{2}pv^2_2+pgy_2$

$pgy_1=\frac{1}{2}pv^2_2 +pgy_2$

$v_2=\sqrt{2g(y_1-y_2)}$

where;

P₁ and P₂ = initial and final pressure.

v₁ and v₂ = initial and final fluid velocity

y₁ and y₂ = initial and final height

p = density

g = acceleration due to gravity

So, from our given parameters; let's replace

v₁ = 0 m/s ; y₁ = 0.35 m ; y₂ = 0 m ; g = 9.8 m/s²

∴ we have:

v₂ = $\sqrt{2*9.8*(0.35-0)}$

v₂ = $\sqrt {6.86}$

v₂ = 2.61916

v₂ ≅ 2.62 m/s

Similarly, using the expression of the continuity for water flowing through the spigot into the cylinder; we have:

v₂A₂ = v₃A₃

v₂r₂² = v₃r₃²

where;

v₂r₂ = velocity of the fluid and radius at the spigot

v₃r₃ = velocity of the fluid and radius at the cylinder

$v_3 = \frac{v_2r_2^2}{v_3^2}$

where;

v₂ = 2.62 m/s

r₂ = 1.5 mm

r₃ = 1.0 cm

we have;

v₃ = (2.62 m/s)* $(\frac{1.5mm^2}{1.0mm^2} )$

v₃ = 0.0589 m/s

∴ velocity of the fluid in the cylinder = 0.0589 m/s

So, in an open-closed system we are dealing with; the frequency can be calculated by using the expression;

$f=\frac{v_s}{4(h-v_3t)}$

where;

v_s = velocity of sound

h = height of the fluid

v₃ = velocity of the fluid in the cylinder

$f=\frac{343}{4(0.40-(0.0589)(0.4)}$

$f= \frac{343}{0.6576}$

= 521.59 Hz

∴ The frequency = 521.59 Hz

What are the rate at which the frequency is changing (Hz/s) when the cylinder has been filling for 4.0 s?

The rate at which the frequency is changing is related to the function of time (t) and as such:

$\frac{df}{dt}= \frac{d}{dt}(\frac{v_s}{4}(h-v_3t)^{-1})$

$\frac{df}{dt}= -\frac{v_s}{4}(h-v_3t)^2(-v_3)$

$\frac{df}{dt}= \frac{v_sv_3}{4(h-v_3t)^2}$

where;

v_s (velocity of sound) = 343 m/s

v₃ (velocity of the fluid in the cylinder) = 0.0589 m/s

h (height of the cylinder) = 0.40 m

t (time) = 4.0 s

Substituting our values; we have ;

$\frac{df}{dt}= \frac{343*0.0589}{4(0.4-(0.0589*4.0))^2}$

= 186.873

≅ 186.9 Hz/s

∴ The rate at which the frequency is changing = 186.9 Hz/s when the cylinder has been filling for 4.0 s.

Answer from: Quest

No because a circle or pie graph usually shows percentages you'd need a line graph

Answer from: Quest

The answer is a i think

Another question on Physics

Physics, 22.06.2019 09:40

(a) assume the equation x = at^3 + bt describes the motion of a particular object, with x having the dimension of length and t having the dimension of time. determine the dimensions of the constants a and b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.) (b) determine the dimensions of the derivative dx/dt = 3at^2 + b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.)

Answers: 1

Answer

Physics, 22.06.2019 15:30

Identify the correct relation showing that the radius r of the orbit of a moon of a given planet can be determined from the radius r of the planet, the acceleration of gravity at the surface of the planet, and the time τ required by the moon to complete one full revolution about the planet. determine the acceleration of gravity at the surface of the planet jupiter knowing that r = 71 492 km and that t= 3.551 days and r= 670.9 × 10^3 km for its moon europa.

Answers: 2

Answer

Physics, 23.06.2019 01:30

)consider two positively charged particles, one of charge q0 (particle 0) fixed at the origin, and another of charge q1 (particle 1) fixed on the y-axis at (0,d1,0). what is the net force f⃗ on particle 0 due to particle 1?

Answers: 2

Answer

Physics, 23.06.2019 11:30

Which of the following characteristics of earth's relationship to the sun explains the existence of earth's seasons? choose all that apply. earth has a satellite called the moon, which rotates around earth. earth spins on its axis, completing one rotation each day. earth's axis always points in the same direction relative to the stars. earth's axis is tilted relative to its orbital plane. earth orbits around the sun, completing one orbit each year.

Answers: 1

Answer

You know the right answer?

A 44-cm-diameter water tank is filled with 35 cm of water. A 3.0-mm-diameter spigot at the very bott...

Questions