A worker on the roof of a house drops his hammer, which slides down the roof at a constant speed of 4 m/s. The roof makes an angle of 30 degree with the horizontal, and its lowest point is 10 m above the ground. What is the horizontal distance traveled by the hammer after it leaves the roof of the house and before it hits the ground? Use g 10 m/s2.

4.25m

Explanation:

The horizontal and vertical component of the velocity as it leaves the roof is

Neglect air resistance, then gravitational acceleration g = 10m/s2 is the only thing that affect the vertical motion of the hammer. We can use the following equation of motion to solve for the time t of dropping

where h = 10m is the distance of dropping before the hammer reaches the ground

t = 1.23 or t = -1.63

Since t can only be positive we will pick t = 1.23

t is also the time that it takes to travel horizontally at the constant rate of 3.64 m/s

So the horizontal distance traveled by the hammer is

3.64*1.23 = 4.25 m

the answer is ampere

the ampere is used to measure electricity. an ampere is a unit of electric current equal. a unit of measure for the flow of current in a circuit. one ampere is the amount of current flow provided when one volt of electrical pressure is applied against one ohm of resistance.

it would be c. predictability