A confined aquifer with a porosity of 0.15 is 30 m thick. The potentiometric surface elevation at two observation wells 1000 m apart are 52.35 m and 50.90 m. If the horizontal hydraulic conductivity of the aquifer is 25 m/day. Determine the flow rate per unit width of the aquifer, specific discharge, and average linear velocity of the flow assuming steady unidirectional flow. How long would it take for a tracer to travel the distance between the observation wells?

Part (a) The flow rate per unit width of the aquifer is 1.0875 m³/day

Part (b) The specific discharge of the flow is 0.0363 m/day

Part (c) The average linear velocity of the flow is 0.242 m/day

Part (d) The time taken for a tracer to travel the distance between the observation wells is 4132.23 days = 99173.52 hours

Explanation:

Part (a) the flow rate per unit width of the aquifer

From Darcy's law;

where;

q is the flow rate

K is the permeability or conductivity of the aquifer = 25  m/day

b is the aquifer thickness

dh is the change in th vertical hight = 50.9m - 52.35m = -1.45 m

dl is the change in the horizontal hight = 1000 m

q = -(25*30)*(-1.45/1000)

q = 1.0875 m³/day

Part (b) the specific discharge of the flow

V = 0.0363 m/day

Part (c) the average linear velocity of the flow assuming steady unidirectional flow

Va = V/Φ

Φ is the porosity = 0.15

Va = 0.0363 / 0.15

Va = 0.242 m/day

Part (d) the time taken for a tracer to travel the distance between the observation wells

The distance between the two wells = 1000 m

average linear velocity = 0.242 m/day

Time = distance / speed

Time = (1000 m) / (0.242 m/day)

Time = 4132.23 days

explanation:

earth's surface is mainly heated by the absorption of infrared radiation from the sun.

evaporation occurs because molecules in liquid water are warmed ( usually by the sun) and vibrate quicker, becoming less dense and rise.

condensation occurs because molecules in water vapor are cooled and therefore vibrate more slowly thus becoming more dense and eventually fall to earth.

lines of equal barometric pressure on a weather map are called: isobars : lines of equal temp on a weather map are called: isotherms.​

current and voltage can both be different in different parts of a circuit so it matters where you place the ammeter and voltmete