On your first day at work as an electrical technician, you are asked to determine the resistance per meter of a long piece of wire. The company you work for is poorly equipped. You find a battery, a voltmeter, and an ammeter, but no meter for directly measuring resistance (an ohmmeter). You put the leads from the voltmeter across the terminals of the battery, and the meter reads 13.0 V. You cut off a 20.0 m length of wire and connect it to the battery, with an ammeter in series with it to measure the current in the wire. The ammeter reads 7.60 A. You then cut off a 40.0 m length of wire and connect it to the battery, again with the ammeter in series to measure the current. The ammeter reads 4.50 A. Even though the equipment you have available to you is limited, your boss assures you of its high quality: The ammeter has very small resistance, and the voltmeter has very large resistance. What is the resistance of 1 meter of wire?

Explanation:

Firstly, when you measure the voltage across the battery, you get the emf,

E = 13.0 V

In order to proceed we have to assume that the voltmeter offers no loading effect, which is a valid assumption since it has a very high resistance.

Secondly, the wires must be uniform. So the resistance per unit length is constant (say z). Now, even though the ammeter has very little resistance it cannot be ignored as it must be of comparable value/magnitude when compared to the wires. This is can seen in the two cases when currents were measured. Following Ohm's law and the resistance of a length of wire being proportional to it's length, we should have gotten half the current when measuring with the 40 m wire with respect to the 20 m wire (). But this is not the case.

Let the resistance of the ammeter be r

Hence, using Ohm's law we get the following 2 equations:

  .......(1)

    ......(2)

Substituting the value of r from (2) in (1), we have,

which simplifying gives us, (which is our required solution)

putting the value of z in either (1) or (2) gives us, r = 0.5325

explanation:

considering the bohr theory, the type of connection that requires the transfer the answer conuldn't be right

first thing first of the answer is with technology. second thing second thing is that the big bang theory did not happened u see they say it did but what they dont realize is that like dinasures are still a round they might deny it but they and look at these 12 foot human skelteons they find lets see didnt the bible say something about giants. hope this peace.